Re: Floppy Boot Install - Service Pack 3

Tech-Archive recommends: Speed Up your PC by fixing your registry



we read what you said...we have just never come across a system where the SATA Controller does NOT see the CD/DVD drives in
the BIOS......and therefore wonder as to why your system would do that..
By your answer I assume you are using the Promise Controller for the CD/DVD and have it turned on in the BIOS..both VIA and Promise enabled??
and have done what Andy suggested???
I also assume that you have tried the reverse set up..HD on the Promise SATA and CD/DVD on the VIA ???

Like I said this puzzles me and further research is required...I am still searching and nowhere have I run across any article where
the same problem exists...I have run across numerous tests of this mobo and they all loaded XP off CD without problems...
what's different on yours????

pk

--
DISCLAIMER: If you find a posting or message from me
offensive, inappropriate, or disruptive, please ignore it.
If you don't know how to ignore a posting, complain to
me and I will be only too happy to demonstrate... ;-)


"Link77" <Link77@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:451F55DE-980B-4FF1-817F-F68C043C64CB@xxxxxxxxxxxxxxxx
I don't think you guys read what I'm saying.

1. The SATA chip is fully enabled in the BIOS as stated before.
2. There is Hard drive connected to the SATA interface which the computer
boots from, so I know the SATA chip is working.
3. As far as the Promise chip goes, its not very good. It's totally unable
to detect any optical drive.

As far as I can see the only solution is the Floppy Install set?

"Andy" wrote:

Connect the DVD drive to SATA1 or SATA2 connector. In BIOS under
Advanced menu, Enable OnChip SATA Boot ROM.



.



Relevant Pages

  • Re: eSATA support
    ... SATA drive: a harddrive that uses the SATA interface. ... It has these maddingly easy to break off data cable connector. ... most prevalent of all the SATA drives in the market. ... eSATA connector is different. ...
    (microsoft.public.windowsxp.hardware)
  • Re: eSATA support
    ... these eSATA ports to connect to a SATA drive whether in a naked configuration ... The most basic way is a SATA drive connects to a SATA connector on the ... SATA drives are hot plugable, I have not worked up the courage to turn off ...
    (microsoft.public.windowsxp.hardware)
  • 2.6.0-test9 SATA and 1394 problems
    ... report, though, the most serious of which is that my SATA controller (VIA ... all seems well and the drives run fine. ... 100% native mode on irq 20 ...
    (Linux-Kernel)
  • Re: XP Pro wont boot, safemode wont help, recovery console doesnt h
    ... Win XP Pro installed on a 300GB SATA drive, ... When trying to boot it gets to the standard Windows logo and after ... new install, which AFAIK would wipe the drive). ... drives" section? ...
    (microsoft.public.windowsxp.general)
  • Re: Problems with 2nd Internal Hard DRive Installation
    ... However if you install XP on a SATA drive ... Even the newer LGA1366 socket motherboards use the Master/Slave ... I'm in the middle of benchmarking a bunch of hard drives ... SATA and PATA (Parallel Advanced Technology ...
    (microsoft.public.windowsxp.basics)