Re: OEM Release vs. SP1 vs. SP2 Product Key issue
- From: "Jordan" <nospam@xxxxxxxx>
- Date: Mon, 6 Aug 2007 17:46:15 -0400
I did some digging and I found out that the problem lies in the SETUPP.INI
file on the different Windows XP disks. This file is what tells Setup
whether or not it is a OEM, Retail, or Upgrade CD and in the case of the OEM
whether or not it is SP2 or less. This then determines what key can be used
during setup.
SP1 and SP1a OEM CD has the following in the SETUPP.INI file:
[Pid]
ExtraData=786F687170637175716954806365EF
Pid=55274OEM
While SP2 OEM has the following in the SETUPP.INI file:
[Pid]
ExtraData=786F687170637175716954806365EF
Pid=76487OEM
When you install Windows it makes up the ProductId of following registry
keys based on the Pid in the SETUPP.INI file. For SP1x the Product ID is
55274-OEM-xxxxxxx-xxxxx and for SP2 it is 76487-OEM-xxxxxxx-xxxxx:
HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProductId
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\ProductId
HKLM\SOFTWARE\Microsoft\Internet Explorer\Registration\ProductId
In order to get this to work with RIS I just use my Windows XP2 CD image and
just used the SIF answer file to use the same CD key for initial setup.
Naturally if you go to activate 50 computers with the same key it will bomb
so you have to use the instructions in the MS Article to change to the key
code for that computer:
http://support.microsoft.com/kb/328874
Now they question is, what to do about the fact that when you try to change
the key and enter the SP1x key code using the above article. If you use any
of the listed MS methods your SP1x keycode will be denied or generate an
error if you use the vbscript if you did what I did and installed using an
SP2 image. You need to first change the Product ID codes in the 3 registry
keys to match the right version of Windows service pack keycode you are
trying to enter. I have successfully tested this by manually changing the 3
keys listed above to 55274-OEM-xxxxxxx-xxxxx after fully installing Windows.
The only thing I need to do now is to see if I can write a VB script to
modify these entries quickly.
"Shenan Stanley" <newshelper@xxxxxxxxx> wrote in message
news:uE1z1Ts1HHA.1208@xxxxxxxxxxxxxxxxxxxxxxx
Jordan wrote:
I have about 50 PCs in a product test department that use the PCs
with some special software and hardware to test our products. We
are revamping the whole setup so the easiest thing to do would be
to just format the computers and use my RIS setup to reinstall
windows and use Group Policies to distribute the new software to
the computers. I could have the whole department done in a few
hours except for one issue.....
The computers were purchased at various times over the past few
years and all came with OEM versions of Windows. Some with
straight XP, some with Sp1 or 1a, and some with SP2. YES I will
abide by the OEM agreement and only use that product key on the
computer on which it came, but the problem is:
1. If I try to install XP SP2 on all computers, the release, Sp1
and Sp1a keys do not work.
2. If I slipstream SP2 into the release copy, the Sp1x keys and Sp2
do not work.
3. If I slipstream SP2 into Sp1x, the release and SP2 keys do not
work.
It would be very irritating have to have 3 versions of XP Pro SP2
(SP2, release slipstreamed to SP2, SP1x slipstreamed to SP2) on my
RIS server and have to maintain them so is there some way to be
able to use all my legitimate keys on just one image?
If 1,2 or 3 you have given above are true - something must be going wrong
with your slipstream/integration. There is only one SP2 where Windows XP
OEM/RETAIL/MSDN/VOLUME licenses are concerned. Integrating the service
pack and subsequent critical updates into your installation media should
*not* effect the product key in any way. However - you should make sure
you have removed the OEM's modifications (winnt.sif/unattend.txt) before
you begin - although in truth - it should not matter.
Also - in a situation such as yours - it may be WELL worth the cost to
look into Volume Licensing. It would greatly simplify... everything.
--
Shenan Stanley
MS-MVP
--
How To Ask Questions The Smart Way
http://www.catb.org/~esr/faqs/smart-questions.html
.
- References:
- OEM Release vs. SP1 vs. SP2 Product Key issue
- From: Jordan
- Re: OEM Release vs. SP1 vs. SP2 Product Key issue
- From: Shenan Stanley
- OEM Release vs. SP1 vs. SP2 Product Key issue
- Prev by Date: Re: Windows XP Pro - SP2 Replacement disk
- Next by Date: Re: OEM Release vs. SP1 vs. SP2 Product Key issue
- Previous by thread: Re: OEM Release vs. SP1 vs. SP2 Product Key issue
- Next by thread: Re: OEM Release vs. SP1 vs. SP2 Product Key issue
- Index(es):
Relevant Pages
|
Loading
