Re: XP Pro 64-bit will not install with the Adaptec 39320A HostRai
- From: "DL" <address@invalid>
- Date: Sun, 21 Jan 2007 00:42:00 -0000
I would initially try an in depth memory test www.memtest.org create the
bootable floppy
Are you trying one of the updated winxp 64 hostraid drivers, as available on
adaptec site?
Have you flashed the card firmware update?
I doubt a format is being done if it takes 3 secs
As I understand it, from my Adaptec use, you get free email support if the
card is registered, however I would see this more as a winxp installation
issue
"Darkonus" <Darkonus@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:1E810AF4-86D8-45B2-966A-F5C5FC3369C4@xxxxxxxxxxxxxxxx
Its a Adaptec 39320A-R card, and the E-Mail support is like $88 perincident,
Id rather just go buy a LSI card or something if im going to have to payFull
for support, when the problem is with there drivers.
"DL" wrote:
What is the card?
Adaptec has email support, which is reasonably good
"Darkonus" <Darkonus@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:CA9FF135-5D5E-4652-A07F-9D8579199D86@xxxxxxxxxxxxxxxx
This is my first full 64-bit desktop system that I have just built.
HD'scomponet list will be at the end of this question. I have 2 Ultra 320
biosand I set those up in the HostRaid bios as a Raid-0. I then setup the
someto
boot off the CD, and use the "F6" option to load the Adaptec HostRaiddrivers
for my SCSI card. I select the Array in the setup and have the setup
partition and format the array. After the format is done, witch for
filesreason only takes like 3 secs on a 80gig array, setup trys to copy
andto
the array, it first trys to copy the adaptec drivers from the floppy,
thethen like 10secs later I get this message:Make
"The disk or CD you inserted may be damaged. Press ENTER to try again.
sure you are using the correct disk or CD. If you continue seeing this
message, use a different copy of the disk or CD."
I try another floppy disk and I get the same result. So thinking its
http://adaptec-tic.adaptec.com/cgi-bin/adaptec_tic.cfg/php/enduser/std_adp.php?p_faqid=4068&p_created=1029746469&p_sid=q-lSmEri&p_lva=4068&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MSZwX3Byb2RzPTAmcF9jYXRzPSZwX3B2PSZwX2N2PSZwX3NlYXJjaF90eXBlPWFuc3dlcnMuc2VhcmNoX25sJnBfcGFnZT0xJnBfc2VhcmNoX3RleHQ9dGhlIGRpc2sgb3IgY2QgeW91IGluc2VydGVkIG15IGJlIGRhbWFnZWQ*&p_li=&p_topview=1floppy drive I switch to a new floppy drive and again the same errorabove.
this
Next I search the Adaptec knowlegebase and the only thing I find about
error is this, about a memory resource problem with some motherboards:
hate
If anyone have any sugestions on this problem please leave a msg, I
to
only be able to use XP Pro 32-bit on my 64-bit system.
Here is my componet list.
Motherboard: M2N32 WS Professional
CPU: AMD Athlon 64 FX-62 Dual Core
Mem: G. Skill 2gig CL-5
SCSI Card: Adaptec 39320A-R
.
- References:
- Prev by Date: Re: How do I delete Windows XP (and everything else) from my compu
- Next by Date: Re: Where to get XP Pro?
- Previous by thread: Re: XP Pro 64-bit will not install with the Adaptec 39320A HostRai
- Next by thread: Re: How do I delete Windows XP (and everything else) from my computer?
- Index(es):
Relevant Pages
|
