Re: can't install xp on my sata drive6

Tech-Archive recommends: Fix windows errors by optimizing your registry




"Alex" <ad1979@xxxxxxxxxx> wrote in message
news:%K6bh.74590$4T6.25894@xxxxxxxxxxxxxxxxxxxxxxxx
Hi all

I have 2 IDE hard drives and now I want to add a 250GB Seagate SATA drive
and make this my boot drive with a fresh windows install and use my older
IDE drives as additional storage. In the past week I have been unable to
setup xp on that sata. I boot pc from windows xp home cd, then when
prompted, I press F6 to install third party RAID drivers. After installing
RAID drivers(I tried all of them in the list, RAID as well as AHCI, ICH7,
ICH6, ICH5,...) setup continues loading files and after that...I get a
blue screen with an error message (code 0x0000007B) that says that xp is
shut down to avoid damage and that I should try chkdsk or virusscan,
blabla...

*I tried xp sp1a
*I made an xp with sp2 cd (slipstreamed or whatever you call it)
*I tried xp professional sp1
*I used RAID drivers from my motherboard CD
*I used RAID drivers from ASUS website
*I updated my BIOS successfully to latest version
*I tried booting without and with my old IDE drives connected
*I tried port SATA1 as well as SATA2

And it all gave the same error message.

The strange thing is that when I boot normally from my old IDE drive, in
windows my sata drive appears in disc management as a non-partitioned
drive. So it is recognised.

In device manager I cannot see any RAID or AHCI entry, which is strange
because the F6 RAID floppy utility readme file says the following about
this: "Your system does not appear to be running in RAID or
AHCI mode. If you feel that your system is running in
RAID or AHCI mode and you do not see any of the
controllers listed above, you may choose to contact
your system manufacturer or place of purchase for
assistance"

I thought of partitioning and formatting the sata when booted from my old
IDE to windows but then my sata will get drive letter G:\ and I have a
horrible feeling that I won't be able to change that to C:\ afterwards to
make the sata the (primary)boot drive(?)

Is there any other way to get Bully Gates' OS to setup on this SATA??

Any help is much appreciated.

Alex

Intel P4 775socket
windows xp home sp2 32bit
ASUS P5LD2 mobo

No need to post more than once...

Honu


.



Relevant Pages

  • Re: Windows XP hangs on startup after the windows logo shows
    ... I'm able to use the Windows XP SP2 OEM CDROM disk using the F6 ... I did not create a Automated System Recovery disk backup so this ... file is correct for my RAID system. ... v4.5.0.6448 with 2 Seagate Barracuda drives in RAID 0. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Selbstbau-NAS - bitte um Empfehlungen oder Kritik
    ... Windows dank Hyperthreading 4 Kerne), ... Leider wurde er bzw. die Platten ... durchprobiert, weder im SATA, noch RAID oder AHCI Modus wollten ... Hab eine 160 GB Platte am internen SATA POrt für die BS Installation ...
    (de.comp.hardware.laufwerke.festplatten)
  • Re: RAID Controller & Info
    ... The issue appears to be with the SATA Driver responding to an IO Control Request that should only be handled by ... "Returns information about the geometry of floppy drives. ... The setup code actually believes that the RAID volume ... | ATA controllers with or without SW/firmware RAID. ...
    (microsoft.public.windows.server.sbs)
  • RE: setup did not find any hard disk drives installed in your computer
    ... Once done,or if 2 are installed,set BIOS for RAID,set ... create one,let xp format & install auto. ... I began to update windows and when I verified it it politely made me ... Select Drives: ...
    (microsoft.public.windowsxp.help_and_support)
  • Change an Intel motherboard without reinstalling or repairing windows XP
    ... gig SATA drive giving 240 gig of speed for video editing. ... different but quite the same features as for Matrix RAID ... I reboot to windows, fix all the ...
    (comp.sys.intel)