Re: 98 se update to xp
- From: Kevin Darga <KevinDarga@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Sun, 27 Aug 2006 15:48:02 -0700
O.k First off you ROCK! Thanks!, I was told to install win98se first
and then install the XP Update disc. Its doing its thing right now
Games here I come!!!!! Thanks again
"Carey Frisch [MVP]" wrote:
The Windows XP CD is bootable and contains all the tools necessary.
to partition and format your drive. Follow this procedure and allow
Windows XP to partition and format your drive:
NOTE: It would be best to physically disconnect all your peripheral hardware
devices, except the monitor, mouse and keyboard, before installing XP.
NOTE: If you have an internal Zip Drive installed, physically disconnect the
EIDE and power cable to it before proceeding, otherwise your main
hard drive may not be assigned the customary C: drive letter.
After installing Windows XP, you may then reconnect it.
1. Open your BIOS and set your "CD Drive as the first bootable device".
===> Accessing Motherboard BIOS
===> http://www.michaelstevenstech.com/bios_manufacturer.htm
2. Insert your Windows XP CD in the CD Drive and reboot your computer.
3. You'll see a message to boot to the CD....follow the instructions.
4. The setup menu will appear and you should elect to delete all the existing
Windows partitions, then create a new partition, then format the primary
partition (preferably NTFS) and proceed to install Windows XP.
5. Clean Install Windows XP
http://michaelstevenstech.com/cleanxpinstall.html
[Courtesy of Michael Stevens, MS-MVP]
6. ==> Immediately after installing Windows XP, make sure XP's Firewall is enabled:
==> http://www.microsoft.com/athome/security/protect/windowsxpsp2/Default.mspx
7. After Windows XP is installed, visit the Windows Update website
and download the available "Critical Updates".
8. After installing the critical updates, be sure and visit the support website
of the manufacturer of the computer to download and install any
available Windows XP compatible drivers, such as video adapter
and audio drivers.
9. If you happen to run into any installation difficulties, use the following resources:
How to Troubleshoot Windows XP Problems During Installation
http://support.microsoft.com/default.aspx?scid=kb;EN-US;310064
Troubleshooting Windows XP Setup
http://www.kellys-korner-xp.com/xp_setup.htm
--
Carey Frisch
Microsoft MVP
Windows - Shell/User
Enjoy all the benefits of genuine Microsoft software:
http://www.microsoft.com/genuine/default.mspx
------------------------------------------------------------------------------------------------------------
"Kevin Darga" wrote:
| Ok lets see, I'm installing a hard drive (120 maxtor) and I only have an XP
| upgrade cd, win98se keeps putting a partion of 8m so I can't install win98se
| to installe mt upgrade cd, I keep trying the "Fdisk" and I delete the partion
| and set up the full 120 gig to mian partion and set as acctive, but then it
| gives me an error when rest and says" the diag tool are on drive c:" Been
| trying for awhile frustrated, The upgrade cd is installed on my 80 gig with
| no problem. By the way the Mator 120 is not new but pretty new.
- References:
- Re: 98 se update to xp
- From: Carey Frisch [MVP]
- Re: 98 se update to xp
- Prev by Date: Re: 98 se update to xp
- Next by Date: Re: Exe files appear as dos programs
- Previous by thread: Re: 98 se update to xp
- Next by thread: Re: 98 se update to xp
- Index(es):
Relevant Pages
|
Loading
