Re: dual boot xp/xp hangs on orignal xp boot

Tech-Archive recommends: Fix windows errors by optimizing your registry



"MarkusR" wrote:
My first physical drive is partition in 3 partitions:

Drive C (30gb) (original xp)
Drive D (100gb) (misc storage)
Drive E (30gb) (was blank)

second physical drive(s) RAID 0
Drive F

I installed the second XP on the E drive and correctly loaded the SATA
drivers...

I can boot to the second XP and all works fine now.

Problem is that I cannot boot to the original XP disk IF my Drive F is
powered.


1) Why is there only one physical drive in RAID 0 mode?
2) Is the RAID controller on the motherboard or is it on an
expansion card?
3) Are all the HDs SATA, or is there a mix? Which are
SATA and which are PATA?
4) Which HD is at the head of the BIOS's HD boot order?
5) Which partition is marked "active" on each HD?
6) What are the contents of the boot.ini files on the 2
partitions which contain a WinXP OS?
7) Are all the partitions Primary partitions?

*TimDaniels*
.



Relevant Pages

  • Re: True Image Cloning
    ... partitions, replacing the 80 with 250 and tried to recover into the blank ... I get the cannot boot message and must use the install cd to enable the ... large variety of systems that ostensibly had USB boot capability. ... recommend to achieve boot capability via an external HDD is to use a SATA ...
    (microsoft.public.windows.vista.hardware_devices)
  • Re: SATA Western Digital Caviar HD install and set up problems
    ... The F6 option may be required when you initially install win, ... Your mobo can utilise two forms of raid using two different drivers, ... successfully using raid sata there is no need for the other. ... Disconnecting the WD allows Windows to boot again. ...
    (microsoft.public.windowsxp.hardware)
  • [SLE] GRUB/RAID/Root Partition problem
    ... I am running SuSE 9.1 on a dual boot system with XP Home. ... /dev/hda7 35.1GB Linux RAID ... Last night after moving the computer's location, SuSE locked up on load. ... I have around 100GB of data on the RAID partitions that I ...
    (SuSE)
  • Re: True Image Cloning
    ... the partitions, replacing the 80 with 250 and tried to recover into the ... I get the cannot boot message and must use the install cd to enable the ... I am using True Image Home V10 Build 4.942) with Windows Vista Home ... recommend to achieve boot capability via an external HDD is to use a SATA ...
    (microsoft.public.windows.vista.hardware_devices)
  • Re: RAID controllers - BIOS conflict - pls help
    ... with boot drive on built-in VIA SATA RAID controller. ... RAID 5 engine) and 3 WD 250GB drives. ... the board was unable to load VIA RAID controller to boot off it. ...
    (comp.sys.ibm.pc.hardware.chips)