Re: Installation process quits

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Thanks for your response.

I checked the compatibility and the following are the hardware related
issues reported:

1)IBM ThinkPad UltraBay:
ThikPad Ultraby Hot/Warm Swap Driver
2)Printer
Ring Zero Fax

I do not think the above should not affect installation(UltraBay is not
used).

Let me state what have been tried:

The PC is IBM ThinkPad 600E with 288MB RAM and 40GB HD.

1)Attempt to install WXP by booting from CDROM:
Result: The system shut itself down before the install process got to
the first reboot. Forced reboot generated display of "ntldr is missing"

2)The partition formatted in FAT32 and "sys" of DOS was transferred to
the drive, then installation was attempted:
Result: Same as above except that display of C:> prompt instead of
"ntldr is missing'.

3)Attempt to install WXP by executing winnt.exe in I386 which was copied
to the HD:
Result: Same as above

4)Attempt to upgrade install WXP from installed W98:
Result: While doing "Preparing Installation", "Setup cannot copy the
file: xxxxx" occurred frequently, I moved the process ahead by selecting
"Ignore" but at certain point the system shut itself down. When I
restarted the PC, installation process resumed but the same thing repeated.

5)The HD was temporarily moved to IBM ThinkPad X20 and WXP was installed
on to the HD, then the HD was moved back to ThinkPad 600E:
Result: WXP worked fine with ThinkPad 600E.

I would like to know how to install WXP directly to the ThinkPad 600E.
Any further suggestion would be appreciated.

DL wrote:
I believe the winxp cd contains a Folder/app that checks the compatibility
of the PC
Have you run this? - sorry I dont know the Folder/App name

"churin" <churin@xxxxxxxxxxxxx> wrote in message
news:%23X76R8uSGHA.4452@xxxxxxxxxxxxxxxxxxxxxxx
Thanks for your response.
I should have mentioned this but I am aware of the KB article and have
already tried that. If the proposed remedy in the KB is applied then C:
prompt is displayed and no resumption of installation process occurs.

The KB article does not appear applicable because 1) what I am trying to
do is not upgrade installation and 2) the installation process does not
get to the first automatic reboot stage. The problem is that the
process just ceases to progress before the first automatic reboot and
the system shuts itself down.

Any further suggestion would be appreciated.

Rich Barry wrote:
See if this MSKB Article helps

http://support.microsoft.com/default.aspx?scid=kb;en-us;Q255220&id=kb;en-us;Q255220

"churin" <churin@xxxxxxxxxxxxx> wrote in message
news:eTghDMqSGHA.5468@xxxxxxxxxxxxxxxxxxxxxxx
My pc boots from WXP Pro CDROM, then after completing the text phase
when the yellow bar graph is at 51% the screen turns black and the PC
is
shut itself down. I restart the PC but it does not resume installation
and ntldr is missing is displayed. Note that 1)the recovery CDROM
which
came with this PC could restore W98 and 2)I could clean install W2K.
I wonder why I can not instll WXP Pro. Please help.



.

Relevant Pages

  • Re: Installation process quits
    ... #5 means that I could install WXP on the HD after it was temporarily ... moved to another ThinkPad. ... 1)Attempt to install WXP by booting from CDROM: ... prompt is displayed and no resumption of installation process occurs. ...
    (microsoft.public.windowsxp.setup_deployment)
  • Re: Installation process quits
    ... followed by an install of the drivers, from IBM, for this specific PC ... The PC is IBM ThinkPad 600E with 288MB RAM and 40GB HD. ... 1)Attempt to install WXP by booting from CDROM: ... prompt is displayed and no resumption of installation process occurs. ...
    (microsoft.public.windowsxp.setup_deployment)
  • Re: Is There Anyone Has Installed Suse 10 On Ibm Thinkpad, Install on IBM ThinkPad
    ... I am a SuSE fan and I just got a new IBM T43 ThinkPad, ... if I can install SeSE 10 on it. ... Then last week I got round to putting a SUSE 10.0 partition on it and it ...
    (alt.os.linux.suse)
  • Re: Stop error when trying to install Windows Updates
    ... Updated all drivers again to verify the latest and greatest. ... And neither of those will install by themselves. ... special in the MS download process that is causing the problem. ... further into the installation process then before. ...
    (microsoft.public.windowsupdate)
  • Re: Which model thinkpads work best with OS2?
    ... I've had a T40 running OS/2 for a couple of years and it's been great. ... The only thing that does not work in OS/2 is the internal modem but I have a Xircom card modem that works okay when a modem is needed, which is pretty seldom nowadays since most hotels offer either wireless internet or plugin lan internet. ... One caveat, it's a little tricky to get OS/2 and Windows XP installed together on the thinkpad with boot manager but it can be done and after they are installed, you will probably never have to do it again. ... If you just want OS/2 by itself, it's easy to install but a little time consuming to install all of the drivers after the os has been installed. ...
    (comp.os.os2.misc)