Re: replaced motherboard and hard drive

Tech-Archive recommends: Fix windows errors by optimizing your registry



Main computer actually does not 'talk' to disk drive. It talks to a
computer that is part of disk drive. Bios seeks responses from that
disk 's computer. If it does not see same, then BIOS gives up. But I
tend to go farther. Some simple programs found on freeware include
IDEINFO, INDENTIFY, 4DRVUTIL, or DUG_IDE. Each will ask disk drive to
identify itself - including model and sometimes serial number. So (for
example) if one data line is defective, I can see and sometimes correct
that one failed connection. I put these programs on media that will
boot an OS. Floppy, CD-Rom, or small hard drive that has DOS or some
other OS loaded.

Just another example of tools that quickly ID the reason for failure
long before I try to fix anything. BTW, best way to use these tools is
to first use them on a known good machine. For lurkers, that means one
prepares for failure by first learning these basic techniques on a
working system - before failures occur.

mybabiesdaddy wrote:
thanks w torn..all i know is that duke power had me take the computer to a
shop that they use to work on their computers and that they test each part by
putting them in a good unit and testing them..i guess thats what they told
me..after talking with dell they are also telling me its the harddrive..it's
brand new..but how do they know???? i can now get into the bios screen and
it said no harddrive installed..even though i have new ide cable,new hard
drive.new power supply ,and new motherboard???i just can't get any answers to
my questions....do i need drivers cd to load hard drive info..i've heard that
i need xp sp1 or sp2..can i get that on cd or floopy..i just don't know..any
help?? thanks Randy

.



Relevant Pages

  • Re: Bug: get EXT3-fs error Allocating block in system zone
    ... No failures with hdd or motherboard on windows. ... BIOS version on the machine. ... I first got acpi failure on boot, pci=nommconf worked first time, than I ...
    (Linux-Kernel)
  • Re: NTLDR fehlt
    ... Wenn ich beide Stecker abziehe kommt DISC BOOT ... Habe ich an anderem Rechner nochmal getestet. ... > Wenn Du beide FP abziehst und er trotzdem einen DISC BOOT FAILURE meldet, ... Vielleicht erneuerst Du das BIOS mal. ...
    (microsoft.public.de.german.windowsxp.hardware)
  • Re: Unable to Startup
    ... That is a sure sign of hardware failure. ... enter the bios and check for overheating problems. ... If you are running an overclocked system then you may have to reset ...
    (microsoft.public.windowsxp.general)
  • Re: NTLDR fehlt
    ... Wenn ich beide Stecker abziehe kommt DISC BOOT ... Habe ich an anderem Rechner nochmal getestet. ... Wenn Du beide FP abziehst und er trotzdem einen DISC BOOT FAILURE meldet, ... BIOS das Teil nicht richtig erkannt, oder die Verkabelung hat einen Bock. ...
    (microsoft.public.de.german.windowsxp.hardware)
  • Re: Bad disk or kernel (ATA Driver) problem? - SOLVED
    ... > cycle through the BIOS settings. ... to move to the other disk in the pair I actually got a failure on the OTHER ... That got followed up with a soak test with DOS-based diags, ...
    (freebsd-stable)