RE: Can't get windows to install on new SATA drive.
- From: "Mongrel" <Mongrel@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Tue, 12 Apr 2005 20:43:11 -0700
I changed the bios settings to configure the satas as raid. Enabled the
onboard SATA Boot rom. Restarted entered the raid config bios and formed a
Raid 0 Volume containing the two 80 GB hard Drives. Next I rebooted with the
XP CD and hit the F6 and installed the ICHR6 and windows went on and
formatted the rAID volume and it showed up as 1 157GB drive. Goes thru the
preparing to set up process and gets all the way down to installing windows
and I still get the Cyclic Redundancy Error. D:\1386\asms. It still says
One of the components windows needs to continue setup could not be installed.
It also says if you are installing from a CD there may be a problem with
the disc, try cleaning it or try another disc.
Please someone help. Is it a bad disc or HD, or something in the BIOS????????
"Andrew E." wrote:
> Well,youre confused and hitachi must have the cleaning lady answering the
> phones.....1st,thier is no slave and master on SATA drives in a RAID
> configura-
> tion,i believe thats what youre trying for...2nd,format both drives,xp
> recovery
> can do that,or mfg utility,once formatted,configure a RAID array,you'll
> need to
> adjust in BIOS,you'll get a 2nd BIOS menu to do this in if configured
> right,once
> done,you'll need the drivers for intels ICHR6,get those at
> intel,downloads,chipset
> software, you'll use version 4.7 i believe,and the floppy downloads are
> listed.Then
> boot to xp cd,press F6,use the floppy drivers,press s,once you agree to use
> the
> floppy drivers,you can continue on and install xp.If you have problems,go to:
> http://support.intel.com/support/motherboards/desktop/sb/CS-010695.htm
>
> "Mongrel" wrote:
>
> > I purchased an ASUS P5GD2 Deluxe MB have 2 Hitachi SATA HD's on the intel
> > ICHR6 one as the master and one as the slave. In the BIOS I still has them
> > configured as IDE which is the default setting. I bought OEM windows XP
> > which includes SP2. Windows formatted one of the HDs and went all the way
> > through the preparing to install process and when it got to the installing
> > process I got this error:
> >
> > Istall Failed: D:\1386\asms.
> > Error Message: Data Error (Cyclic Redundancy Check).
> > Fatal Error: One of the components windows needs to continue to setup could
> > not be installed.
> > Data Error: (Cyclical Redundancy Check)
> >
> > Hitachi.com says the HD's don't need drivers? And I can't find any to
> > download.
> >
> > Please help?????
.
- Follow-Ups:
- Re: Can't get windows to install on new SATA drive.
- From: MikeD <====
- Re: Can't get windows to install on new SATA drive.
- References:
- Can't get windows to install on new SATA drive.
- From: Mongrel
- RE: Can't get windows to install on new SATA drive.
- From: Andrew E.
- Can't get windows to install on new SATA drive.
- Prev by Date: Installing IIS 6.0 on Windows XP Professional
- Next by Date: Re: SP2 SysPrep Imaging Problem: Lost Model Independence
- Previous by thread: RE: Can't get windows to install on new SATA drive.
- Next by thread: Re: Can't get windows to install on new SATA drive.
- Index(es):
Relevant Pages
|
