Re: XP Setup doesnt see SATA drive... and more

From: peter (peter_at_nomalarky.ca)
Date: 12/24/04


Date: Fri, 24 Dec 2004 16:54:30 -0700

You need to load the storage controller.......not necesarily the RAID driver
since you most likely will not be using RAID with one SATA drive.
peter
"Dom" <Dom@discussions.microsoft.com> wrote in message
news:8088DA6A-D50B-4FAD-8BD7-D320153B7A64@microsoft.com...
> Alright, starting off, I'm not that computer literate, however, I am familiar
> with putting comps together and some tech info. Though I'm at a halt.
> Everything hardware-wise is connected properly in my comp. (My system is at
> the bottom)
> I am trying to go through Windows XP Pro setup (the 6 floppy disk setup from
> www.microsoft.com/) as well as setting up my SATA drivers through another
> floppy so that my hard disk drive will be picked up. I go through three
> floppies of the windows xp setup and half way through the fourth floppy, it
> basically asks me to put the floppy in that has my drivers. After windows
> setup asks me for the driver disk, it reads the floppy and then it gives me
> the screen to where i'd have to press the 's' key to choose the third party
> drivers i want to load. I hit 's' and it continues with two choices:
>
> NVIDIA RAID CLASS DRIVER
> {and}
> NIVIDIA NForce Storage Controller
>
> I was wondering if there is a certain order I have to load these, or if I
> only need one, or what. If you could help me, I'd very much appreciate it!
> What happened first is I chose only the NVIDIA RAID CLASS DRIVER. Before the
> end of the fourth windows setup floppy disk, it gives me the error:
> 'nvraid.sys not found' I've checked the floppy with the SATA drivers on it,
> and surely enough, it does have nvraid.sys; is there a problem here?? and how
> bad??
>
> System:
> AMD Athlon 64-bit CPU
> Chaintech Zenith ZNF3-250 NVIDIA Chipset
> 80GB Seagate 7800 Barracuda hard disk drive
> Radeon 9600 series video card
> (Trying to install Windows XP Pro)



Relevant Pages

  • trouble with mounting a 1.5 TB raid6 volume in 2.6.19-rc5-mm1
    ... Raid Level: raid6 ... # Generic Driver Options ...
    (Linux-Kernel)
  • Re: SATA drive not recognized
    ... F SATA and everything that goes with it. ... brand new install on an empty disk drive. ... and only the RAID drivers are listed in that file. ... you should be able to use the Microsoft native storage driver built ...
    (microsoft.public.windowsxp.hardware)
  • Re: P4PE - not seeing SATA drives or network card.
    ... Secondly you have to install the motherboard's SATA controller drivers from the motherboard's installation CD before the board will see SATA harddrives. ... In terms of getting a SATA driver to install, ... the SATA diskin a RAID mode. ...
    (alt.comp.periphs.mainboard.asus)
  • Re: RAID Controller & Info
    ... the Intel driver for SATA HD is the root cause. ... | controller like the ICH5R on 875P chipset mobos and NOT in RAID ... |> "Returns information about the geometry of floppy drives. ...
    (microsoft.public.windows.server.sbs)
  • processes hung in D (raid5/dm/ext3)
    ... The kernel is 2.6.7-rc3-bk4 with 2 patches: ... The raid array and PV/VG/LVs were created under 2.6.5 with the 32/64 ... # ACPI Support ... # Generic Driver Options ...
    (Linux-Kernel)