Re: Dual Boot w/XP Pro Ugrade?

From: Bruce Chambers (bruce_a_chambers_at_h0tmail.com)
Date: 09/24/04


Date: Fri, 24 Sep 2004 09:02:45 -0600

Netherwolf wrote:
> Ranting cynicism and back-story: (Fast forward to end)
> I'm running Win2k Pro and after several attempts to setup
> a dual boot system w/98se using the proscribed method, I
> threw up my hands in despair and went with a clean
> install. For some reason, that route didn't crash and
> reboot after installing COM+ components. After a bit of
> reading and rethinking, I'm thinking of making another go
> at it again, this time with non-proscribed methods.
> And trust me, I regret not having a dual boot every day of
> my life.
>
> But, while passing through a Best Buy, I noticed XP Pro
> available for around $150. This brought to mind
> Microsoft's righteous jihad to rid the earth of Win2k and
> earlier. This also brought to mind the classic quote "I've
> upgraded from XP to 98SE, and I'm much happier now."
>
> ***********************************************************
>
> Actual question begins here:
>
> Can I install a dual/triple-booting system with a copy XP
> Pro UPGRADE? As in, 98SE on C, 2K Pro on D, XP Pro on E?
> Is it possible? And will it crash midway the installation?

    The simplest way I've found to multi-boot between Win9x/Me, Win2K
& WinXP would be to partition your drive roughly as follows:

Primary Partition:
        C: FAT32 Win9x

Extended Partition:

    1st Logical Drive D: NTFS Win2K
    2nd Logical Drive E: NTFS WinXP

    Adjust the partition sizes according to your actual hard drive(s)
size and the amount of space you'd like to allocate to each OS and its
applications.

    Create the partitions using Win9x's FDISK so you can enable large
disk support (FAT32). (No need for 3rd party partitioning
utilities/boot managers and their frequent complications.) You need
only format the Win9x partition at this time, the Win2K/XP
installations can format their own respective partitions as part of
their setup routines.

    Install Win9x first, being sure to select "C:\Windows" when asked
for the default Windows directory. When you subsequently install
Win2K/XP, be sure to specify "D:\Winnt" and D:\Windows," as
preferred/applicable) when asked for the default Windows directory, to
place them on the other partitions. The Win2K/XP installation routines
will automatically set up the Multi-boot menu for you. The default
settings for this menu can be readily edited from within Win2K/XP.

     This method can be adapted to using 2 physical hard drives by
placing the boot partition (C:, which still must be FAT32) and either
of the operating systems on the Primary Master hard drive, and the
second and/or third operating system(s) on the second hard drive. Just
remember to keep each OS in its own partition.

    It is also possible to have a 4th partition for shared
applications, but it would be necessary for such a partition to be
formatted in the common file format (FAT32). The applications would
also have to be installed into each OS (to ensure proper system file
placement and registry updates), one at a time, but the bulk of the
program files could be located on this common partition. I do not,
however, actually recommend doing this as, if you were to uninstall
such an application from one OS, you may not be able to gracefully
uninstall it from the second/third OS, having already deleted crucial
installation data during the first uninstall action.

    Just about everything you need to know (URLs may wrap):

http://www.microsoft.com/windows2000/techinfo/administration/management/mltiboot.asp

http://www.microsoft.com/windowsxp/pro/using/howto/gettingstarted/multiboot.asp

-- 
Bruce Chambers
Help us help you:
http://dts-l.org/goodpost.htm
http://www.catb.org/~esr/faqs/smart-questions.html
You can have peace. Or you can have freedom. Don't ever count on 
having
both at once. - RAH


Relevant Pages

  • Re: microsoft xp unable to log on
    ... separate partition and try copying your data from your current setup to the ... Assuming your system is set to boot from the CD-ROM drive, ... To Repair a Windows XP Installation using Recovery Console press R. ... can delete, create and format partitions. ...
    (microsoft.public.windowsxp.accessibility)
  • Re: More info...
    ... was unable to complete the format". ... I can create and format a 128GB partition 128GB, but if I then try to ... installation program, but then the disk is only 128GB afterwards. ... 300 GB HDD and your older 200 GB HDD has been detected. ...
    (microsoft.public.windowsxp.hardware)
  • Re: Xp Reload failure
    ... You only need to format the partition on which XP is installed, ... during setup as I described and reinstall on that partition. ... >>To Repair a Windows XP Installation using Recovery ...
    (microsoft.public.windowsxp.basics)
  • RE: Hard Drive Partition
    ... To Setup Windows XP now, ... To Repair a Windows XP Installation using Recovery Console press R. ... Select the drive you wish to format, delete the partition, then create a new partition, format as desired and continue with XP installation. ...
    (microsoft.public.windowsxp.hardware)
  • Migrating from Redhat 9 grub questions
    ... To make a long story short, I want to migrate the dual boot on my ... Do I need to know where grub lives, or will the new /boot partition ... When I get to the partition disks stage I would choose to manually partition. ... Since I used the installation disk on a dedicated machine I just ...
    (Debian-User)

Loading