Re: unregmp2.exe error during install/repair

From: digitalchaos (digitalchaos.1br9o3_at_mail.mcse.ms)
Date: 08/29/04 

Date: Sun, 29 Aug 2004 11:01:54 -0500

Found following on tech support site:

Error "Unregmp2.exe - entry point not found, the Procedure entry point
GETIUMS could not be located in the Dynamic link library MSDART.DLL."

--------------------------------------------------------------------------------

The above error may occur when the Windows XP clean or a repair
installation is running.

To fix this problem, please do the following:

1. Press SHIFT+F10 to bring up the command prompt.

2. Type TASKMGR.EXE in the DOS window and press enter. This will open
the Task Manager.

NOTE: If this doesn't work, try CTRL+SHIFT+ESC.

4. In the Task Manager, select the error message window in the
Application list and click End Task.

5. Click the Processes tab and select the process UNREGMP2.EXE and
click End Process.

6. Exit the Command Prompt and resume the installation process.

This should help.

Tom2847 wrote:
> *I had the same problem when reinstalling XP SR1 and had hit the
> button about 5 times before taking the break to check out this site.
> I ran to another machine to get on the Internet and see what the deal
> was. I read the earlier posts about clicking the "OK" 70 or 80 times
> and went back to do that and found my install had finished. It seems
> after the "OK" is hit it takes a while for the response so you may
> not have to hit it 70-80 times but just the once and then go get a
> drink ( stiff one if your legal).
> Good luck to all. Hope it turns out as well for you as it did for
> me. :>) * 

--
digitalchaos
------------------------------------------------------------------------
Posted via http://www.mcse.ms
------------------------------------------------------------------------
View this thread: http://www.mcse.ms/message297206.html