RE: Setup Cannot Copy the file: shell32.dll
From: SparksFlyn (SparksFlyn_at_discussions.microsoft.com)
Date: 08/11/04
- Next message: Voltaic: "diskpart fails intermittently"
- Previous message: Nick Powers: "Post installation WinXP SP2 Splash Screen"
- Next in thread: SparksFlyn: "RE: Setup Cannot Copy the file: shell32.dll"
- Reply: SparksFlyn: "RE: Setup Cannot Copy the file: shell32.dll"
- Messages sorted by: [ date ] [ thread ]
Date: Tue, 10 Aug 2004 22:21:01 -0700
My MB is an Abit BP6 with Dual 466Mhz Celerons, 768 MB RAM, pair of WD 160GB
HD running W2K3 Server Ent Ed since Beta 1 for two years. I have had the
final realease running for the past 8 months. I come home one day and find
my server saying it can find shell32.dll. I was getting BSODs after several
reboots. I tried the ASR several time without luck at recovering the system.
I hope is is just a matter of replacing the memory. I will follow up very
soon if it is so. I hope I can just pop out the bad chip and recover the ASR
files and have my server back.
"Dale Gore" wrote:
> The solution to this problem is:
>
> After many hours of tinkering, it's memory!!! Hardware
> problem. I replaced the memory, and bingo no more
> problems.
>
> Always pays to go with Kingston. Free replacement if
> it's bad.
>
> Hope this helps anyone else if they have this same
> problem.
>
>
> >-----Original Message-----
> >Just curious if anyone has run across this setup problem:
> >
> >I have an ASUS A7N266 with PC133 memory, 256mb. A 48X
> >CDROM, 40GB HD. The machine came up with a virus and
> >nothing would work. So I first fdisked the machine and
> >began the XP PRO install all over.
> >
> >Goes like clockwork until it begins copying files. At
> 2%
> >the message Setup Cannot Copy the file: shell32.dll pops
> >up. I've changed CDROM drives, the memory, the hard
> >drive, removed all cards except the video, updated the
> >BIOS.
> >
> >Any suggestions would be helpful.
> >
> >Thanks,
> >Dale
> >
> >.
> >
>
- Next message: Voltaic: "diskpart fails intermittently"
- Previous message: Nick Powers: "Post installation WinXP SP2 Splash Screen"
- Next in thread: SparksFlyn: "RE: Setup Cannot Copy the file: shell32.dll"
- Reply: SparksFlyn: "RE: Setup Cannot Copy the file: shell32.dll"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|