Re: How to send a fax from a scanned document?

Hi Hal,

."Send FAX WIZARD opens--Click
next Window for "recipient opms.
I fill in name and fax number,3109445920,
my cell #.
Next cover page,
click schedule to send,used 4:10PM today. Priority=normal,
click next= completing send fax wizard opens,says to send fax,
click finish

Checking your step, I still can not understand what you put into
blank box of selectiong recipent page;

next Window for "recipient opms.
I fill in name and fax number,3109445920,
my cell #.

You must fill the recipient name in uppder box and his or her
telephone number in lower box.
"my cell #" has nothing to do with this step!!
You are sending it to the recipient FAX number.


Then I opened
"Fax Console" outbox nothing shown,open FAX monitor nothing shown

As you specified the time to send FAX, opening FAX console
will not show the item in sent item box but should in outbox tray
below of received tray.
Outbox means the box below of received box .

If you cannot find ANY item in all box of FAX console, FAX console
has no link with FAX listed along with your epson printer in "Printer and FAX" .

What status is shown for FAX in "Printer and FAX" ?
Your epson printer status is shown as "ready" I believe,
then your FAX must be shown as "Ready" in "Printer and FAX" if
you use FAX service.

Duke


"Hal" <Hal@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:FF127C99-FD49-402F-AC8B-B1E1600CE575@xxxxxxxxxxxxxxxx
Duke,7/8/07 4:15pm.this is what I just tried,Open my file in my
Documents,the WindowPicture & Fax viewer opens.I click the print symble at
the bottom of the viewer,Photo Printing Wizard opens, click next Wizard
opens,says select Printer & Paper. I select fax option rather than my Epson
regular printer.Widows Photo Print Wizard opens,shows print preview as full
page fax print.Wizard sendspicture to printer."Send FAX WIZARD opens--Click
next Window for "recipient opms.I fill in name and fax number,3109445920,my
cell #.Next cover page, click schedule to send,used 4:10PM today.
Priority=normal, click next= completing send fax wizard opens,says to send
fax, click finish.Completing Photo Wizard opens,Click finish. Then I opened
"Fax Console" outbox nothing shown,open FAX monitor nothing shown. That is
the complete operation. Banning,Ca HAL
--
HAE


"Duke Williams" wrote:

Hi, HAL,

Sorry for late response.

To make your problem clear, could you tell me what's new to you in my
suggestion.
Maybe you found some settings were not done yet before my suggestion.

And also tell me whether FAX monitor window popped up after you
PRINT that doc file to FAX, then what error was shown in FAX monitor
window.
These are needed for trouble shoot.

Duke

"Hal" <Hal@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:21EC2783-FCE6-4F52-BE19-D8770EA72512@xxxxxxxxxxxxxxxx
> Duke,Do you have a FAX machine? If you do send your phone # and see if > I
> can
> a FAX to u. I have done everything you suggested.The info about > Microsoft
> word,my image is filed in my documents,I open it and it appears AND i
> printed
> it to the fax printer and thesending wizard open . I followed the info.
> But I
> could not see that it was sent in the monitor. HAL
> -- > HAE
>
>
> "Duke Williams" wrote:
>
>> Well,
>>
>> You have FAX modem V.92,Data fax Internal donny equipped in your PC.
>>
>> OK you should hooked up with the line from FAX MODEM to the ANALOG
>> telephone
>> line.(Be sure that YOU CAN SEND FAX with FAX MODEM only on ANALOG
>> TELEPHONE
>> line".)
>>
>> As your PC is running Windows XP, have you installed "FAX service" in
>> Start-Control Panel-Add Remove Program-Add Remove Windows Component?
>> This makes "FAX" appeared in Start-"Printer and FAX", as you can >> noticed
>> it
>> besides your normal printer.
>>
>> Now you MUST select your phone line type "PULSE" or "TONE" in
>> Start-Control
>> Panel-"Telephone and Modem Option" - Dial Information TAB as well as
>> Country
>> and your City code or local area code.
>>
>> Ok then you are ready to go to "FAX console" to configure FAX service
>> with
>> "FAX configuration wizard for "Enable Send" and "Enable Receive."
>> As to TSID & CSID box, put any name you like for the identification of
>> your
>> PC-FAX to communicate with other FAX machines.
>>
>> Did you do all above ?
>>
>> Then back to Microsoft Word, open .doc file containing scanned image >> with
>> your scanner following File-Open of Word menu.
>> Now you are ready to PRINT the document following File-Print of Word >> menu
>> selecting "FAX" in Printer Name Drop Down Box of print pop-up window >> of
>> Word.
>>
>> Printing the document to "FAX" will pop up "FAX sending wizard"
>> Recipient's FAX number you must enter to send your Doc.
>>
>> How it goes ?
>>
>> Duke
>>
>> ************************************************
>> "Hal" <Hal@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
>> news:8B39EE5C-2CDF-4D60-BA04-133145CD5E34@xxxxxxxxxxxxxxxx
>> >I have scanned a document in my scanner but can't fax it.Microsoft >> >item
>> > 306663 says it can be done. My PC, DELL says I need an imaging >> > device
>> > which
>> > they say I don't have in my PC.
>> > -- >> > HAE
>>
>>



.