Re: Faxing Error 678

Not really. Your problem seems to be intermittent.
As a first try, I'd remove the modem card, clean the connector and reseat
it, making sure that it is completely seated in the MBD connector.

"This shows there is no problem with the modem card."

"zhj23" <zhj23@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:5B962ECB-3404-4AF8-8A50-7D15D5BE9462@xxxxxxxxxxxxxxxx
I m having this problem when tried to fax "Error 678" (no "hand shake").
But
this error would go off during some sessions. This shows there is no
problem
with the modem card.

Can anyone put this problem right? Thanks.


zhj23


.

Relevant Pages

  • Re: Mackie D8B
    ... connector from the back of the console, wait a few seconds then plug it ... back in & power up. ... clean the contacts and reseat them. ... problem, replaced the cable, reseated the cards and it went away.- ...
    (rec.audio.pro)
  • Re: TECH: Strange problems with playfield lights (none/some/flickering) on my T2
    ... Reseat cables between ... If reseating a connector (other than ribbon cables) ... if it's the CPU controlled game lights, ...
    (rec.games.pinball)
  • Re: cleaning NES cartridges?
    ... that should clean it off also. ... >HI Corey, Thanks! ... I took a couple of carts apart again and wiped them ... >might have been transfered from the carts to the 72 pin connector. ...
    (rec.games.video.nintendo)
  • Re: Intermittent drivability problem due to fretting corrosion -- a case study
    ... Yet another problem fixed by Deoxit D5. ... I have been using it to clean ANY connector I ... remove, no matter how shiny, before returning to service. ...
    (rec.autos.tech)
  • VME backplane bus connector cleaning!
    ... Did you guys have any experience to clean the VME backplane bus ... We have a ELMA backplane with 21 slots. ... (touched the connector side of cards and oil got sticked onto the ...
    (comp.os.vxworks)