Re: Port Forwarding through router to print server


Cari \(MS-MVP\) Wrote:
You should NOT have spaces in the URL.
--
Cari (MS-MVP)
Windows Technologies - Printing & Imaging
http://www.coribright.com/windows

"soulssong" soulssong.2m7r1z@xxxxxxxxxxxx wrote in message
news:soulssong.2m7r1z@xxxxxxxxxxxxxxxx

There doesn't seem to be much information about this subject on the
web.
I am running a Windows XP SP2 HOME wired network of desktop machines
with a wireless DSL modem, Linksys wired router and I just recently
attached an iogear GPS21U single port USB print server to the network
with my HP officejet 5510 all-in-one printer. The print server works
fine on all of the wired network machines. The problem is that I use
my laptop wirelessly and the print server is supposed to have a web
utility for remote printing via IPP.

I have gone into the router and enabled port forwarding to the IP
address of the print server on port 631 as instructed. The
instructions say "Click Add a printer from your printers and faxes
window to begin. Select the option to connect to a printer on the
internet and type in the full IPP address as shown (http://print
server
ip:631/lp1). You must use the external or WAN, IP address of your
router, specify port 631 and queue name lp1 in lower case...."

I assume it would like like this http://default gateway ip/print
server
ip:631/lp1 or http://default gateway ip:631/print server ip/lp1

I tried both ways and using just the print server ip:631/lp1.
Nothing
has worked. I'm sure there's something simple I'm missing. Can
anyone
help?




--
soulssong -
I do not have spaces in the URL. I may have posted it incorrectly just
to show that I was typing in the ip addreses of each.




--
soulssong
.

Relevant Pages

  • Re: XP Firewall blocking Linksys Print Server
    ... >> I have a Linksys PPSX1 print server on a LAN with a PC running Window ... I added an exception for port 9100. ... I suspect the Windows Firewall is also blocking ...
    (comp.security.firewalls)
  • Re: Port Forwarding through router to print server
    ... Windows Technologies - Printing & Imaging ... "soulssong" wrote in message ... attached an iogear GPS21U single port USB print server to the network ... I have gone into the router and enabled port forwarding to the IP ...
    (microsoft.public.windowsxp.print_fax)
  • Re: Using a Local Port instead of Standard TCP/IP in Cluster
    ... Windows 2000 and Windows Server 2003 include the ability to connect to ... not available from a print server within a Windows 2000 or Windows Server ... This functionality was dropped due to changes in the port ...
    (microsoft.public.win2000.printing)
  • Re: cups printing problem
    ... Jordi Gil wrote: ... Port spec and good'ol LPR. ... If the print server is ... Windows based be sure you're actually mapping to the SMB share (UNC path ...
    (Fedora)
  • Re: LPR ports
    ... The only reason we're having an issue here is that we cannot change the port ... address of the router to get the connection 'in' to the LAN at B. ... That is certainly a lot of work for configuring a few printers. ... eternal print server boxes and map IP ports off the windows server to ...
    (microsoft.public.windows.server.networking)