Re: Windows XP Fax

Hi Duke,

I know i will sound a bit slow but here it is.
I have a line from wall socket going into adsl splitter.(LINE)
I have a line from phone going into splitter(LOCAL PHONE)
I have a line from ADSL Modem going into splitter(ADSL MODEM)
How do I get a line into computer to activate inbuilt Modem???

"Duke Williams" wrote:

Hi Guna,

Sounds so far so good, you have set all FAX function of Windows XP.

---------------------------------
| ADSL
|
WALL Jack ------- (LINE IN) Splitter (ADSL)----ADSL Modem
|
| in PC
| (PHONE)
|
---------------------------------
|
|
Telephone

If your setting is like above, you did good job.

As your question whether you must unplug your telephonhe when using
FAX form your PC is UP TO YOUR DATA/FAX MODEM even
you can hook a telephone line divider to PHONE socket of splitter.

---------------------------------
|
|
WALL Jack ------- (LINE IN) Splitter (ADSL)----ADSL Modem
|
| in PC
| (PHONE)
|
---------------------------------
|
|
line divider
| |
( filter) (filter)
| |
Phone DATA/FAX modem in
PC

If your DATA/FAX modem can function through the divider even with
telephone connected to the other jack, you may be haapy.
If not, you have to insert two noise filters to both FAX and telephone line
so that they will not interefere with each other.

Noise filter is sometimes called as "line separator" which is another thing
from "ADSL splitter". Sorry for my wrong terminology in the first reply.

Duke

"Gunna" <Gunna@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:41776C8A-49F1-47AB-BFE7-F5D5EDC7985E@xxxxxxxxxxxxxxxx
Hi Duke,

thankyou for your assistance so far.I have a splitter with line in one end
and adsl modem and local phone the other.
I have line from wall socket going to line,telephone going into local
phone
socket on splitter and adsl connected to adsl modem socket on splitter.
What do I need to do to activate built in fax without having to disconnect
local phone or adsl connection?

Regards

Ray

"WW" wrote:

I am just getting in on this discussion which is largely over my head. I
have cable internet, not phone and I have enabled both send and receive
on
the fas console. I am able to send a fax but there is a recieve error
when I
try to receive either manually or auto. I am using the same phone line
that
went into my fax machine and worked. Is it necessary to unplug allother
phones on the fax line? I have tried this. Is there any other reason
why
the fax modem would fail given the above?
--
WW


"Lem" wrote:

Gunna wrote:

"Duke Williams" wrote:

Hi;

You must go to CONTROL Panel-Add/Remove Program-Add/Remove Windows
Componet to set FAX service cheking its box.

After you do it, go CONTROL PANEL-Telephone and Modem option setting
your loaction. You must add your location with NEW button and select
dialing
method Tone or Pulse.

Remember that DATA/FAX modem must be hooked to the PHONE jack
of the line separator for ADSL.

Last you must do is Opening FAX console to configure it SENDING and
Receivig
FAXs.

Duke
hooked



"Gunna" <Gunna@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:444C2B6C-D278-40C4-B752-D959A666202A@xxxxxxxxxxxxxxxx
I have xp sp2 and I am on ADSL.I would like fax facilities but i
havent fax
set up in Communications eg: To open Fax after installation, click
Start,
point to All Programs, point to Accessories, point to
Communications, and
then click Fax Console.Any ideas freinds??

Regards

Thanks Duke.I have a internal Modem or should i get another one to
send faxes or does adsl cut out internal modem?


A DSL modem is NOT the same as a data/fax modem (which is what you may
have inside your computer). You CANNOT fax using a DSL modem. You CAN
fax using a data/fax modem connected to an analog telephone line.

You missed the most important part of Duke's post:

>> Remember that DATA/FAX modem must be hooked to the PHONE jack
>> of the line separator for ADSL.

If you have one and only one telephone line coming into your house,
that
line carries both DSL signals and telephone signals. Each telephone
jack in your house may be used for DSL, telephone, or both, BUT
each telephone device in the house MUST have a DSL filter connected
between the device and the phone line (your ISP or installer probably
gave you DSL filters).

[There is always an exception. If you had DSL professionally
installed,
particularly if you have a home alarm system that calls a central
station, the professional installer may have installed a "whole house
filter" where the telephone line enters the house. In this case, the
installer would have identified certain wall jacks as being for DSL and
others as being for telephone. In this scenario, your data/fax modem
must be connected to a telephone-designated jack.]

If you want to use a single line for both DSL and phone, you need a
splitter (or what Duke called a line separator, which sounds like a
combination splitter/filter). The connection to your DSL modem goes
into one jack of the splitter, and a DSL filter goes in the other jack.
The other end of the DSL filter connects to your internal modem.



.