Re: new printers

This is a really good question that may not have a good answer!
The answer, unfortunately, may depend on symptoms that only occur when you
attempt an install, and something does not go right.
Ill behaved print monitor modules can cause conflicts. (And it may be the
new or old module that is the culprit) Generally, the applications are ok
to leave alone, with the understanding that some will not work, or not work
correctly with the new printer. Uninstalling an old printer may or may not
remove all the registry entries and alterations. This is more commonly found
with all-in-one printers, or printers that have some sort of "legacy" driver
scheme. Usually the fax/scan side is impacted the most. USB printers
occasionally have conflicts with schemes that setup virtual ports. The
virtual port schemes came about because some of the first generation USB
printer drivers installed multiple copies, one for each USB port. If done
properly, the virtual port schemes can also facilitate LAN use with ethernet
or wireless print servers. Sloppy virtual port schemes can cause all sorts
of difficulties and compatability problems.

Common practice is to install the new printer driver and printer, make sure
the printer works properly, and then think about uninstalling the old
printer drivers. Some of the older printer driver packages would install
correctly only on the first USB port, and may force default selecton of the
newly installed printer. This default selection may reoccur after every
reboot. (Not good when you are adding rather than replacing a printer)
Installing the newest printer from a company is safer than reinstalling an
older printer and driver over a newer printer and driver. (Sometimes the old
driver install will replace modules with obsolete ones that are common to
both.)
Personally, at home, I usually leave the old drivers, since the old printer
is usually available as a backup. There is nothing like running out of ink,
discovering that spare ink for the new printer is depleted, and the stores
are closed or out of stock. (And you have a deadline to meet.)

"smanmike" <smanmike@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:42A02653-5EE4-44E4-AA9B-6AA25E3AA89E@xxxxxxxxxxxxxxxx
Is it the correct practice to uninstall old printer drivers/software
before
installing and new printer software, uninstall old etc. after installing
the
new ones, or should you just leave the old stuff alone?
Replies appreciated and Happy Thanksgiving!


.

Relevant Pages

  • RE: Print Spooler keeps stopping on a new Dell Latitude running XP SP2
    ... my understanding of this issue is: When you try to install ... Spooler service stops. ... Using this method will remove all of the printer drivers installed on the ... BJ Language Monitor ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Several printer installs fail
    ... Using this method will remove all of the printer drivers installed on the ... REG file for backup. ... My print server has failed to install drivers for two different HP ...
    (microsoft.public.windows.server.general)
  • RE: User Installed printer drivers
    ... Thread-Topic: User Installed printer drivers ... thread-index: AcRCepD+5oes31c4TsCRFQV9aaL6WQ== ... I need Domain User accounts to be able to install printer drivers locally ... You will not be able to give plain User accounts the right to install local ...
    (microsoft.public.win2000.printing)
  • Re: IE Script Error in OE when trying to print
    ... No--the printer drivers are from HP and are the latest they have-April, ... Did you install any driver updates that were offered by ... >> by reinstalling them. ...
    (microsoft.public.windows.inetexplorer.ie6.browser)
  • Re: Dimension 4600 No Video on Boot Update
    ... I installed the card last night, ... and my $500 HP corporate scanner was left high and dry with no XP drivers ... HP laser printer drivers seem to work pretty ... maybe it's because I tend to install and use HP lasers with PostScript? ...
    (alt.sys.pc-clone.dell)