USB-printer, informations about virtual printer ports?

Hello,
I hope, You can help me:
I want to use two or more printers on my notebook connected by USB. The
printers are connected on the same USB-port, e.g. a canon bj 30 for
outside of the office and a kyocera fs 1010 for use in the office. If
the Kyocera will be installed first, PnP assign it to USB001. But if I
install the BJ30 afterwards, PnP also assign it to USB001 and the
Kyocera will no longer work on this virtual port, because PnP creates
USB002 for the fs1010. Then I have to delete the Kyocera or change its
configuration manually to USB002.

In the registry, there are no entrys in
HKLM\CurrentControlset\Enum\USBPRINT for the BJ30.

Can anybody help me? Where can I find further informations on this
topic (I browsed the MSDN, the platform SDK, DDK and couldn´t find
anythin useful...)?
Is there any possibility to control this behaviour or to assign the
ports to the printer before the printers are connected to the notebook?

Thanks in advance and sorry for my humble english...

.

Relevant Pages

  • Re: Beware mac os x if you have a kyocera printer.
    ... >>>compatible with kyocera printers. ... >>>I used the drivers on the disk which came with the printer, ... >>>your own head be it if you buy a Mac. ...
    (comp.sys.mac.advocacy)
  • Re: USB-printer, informations about virtual printer ports?
    ... I'd suggest purchasing a powered USB hub to solve your problems. ... I want to use two or more printers on my notebook connected by USB. ... outside of the office and a kyocera fs 1010 for use in the office. ... the Kyocera will be installed first, PnP assign it to USB001. ...
    (microsoft.public.windowsxp.print_fax)
  • Re: Personal laser printers that can duplex-print on mac osx tiger?
    ... As a Kyocera engineer and dealer in the UK ... and photocopiers are all built with long life components to reduce cost ... and their workgroup and departmental printers are guaranteed ...
    (comp.sys.mac.system)
  • Re: Kyocera printer fault
    ... Derek Haslam wrote: ... quality but which has developed an annoying fault. ... A while ago I threw away a Kyocera which had had the same problem from ... as well built as the other HP printers, and was om offer at a serious ...
    (comp.sys.acorn.hardware)
  • Printer enable
    ... I changed dll or something to enable the ... printers disappeared from the Printers and Faxes list. ... PNP ... will not recognize either the Brother MFC 8600 or HP 7150. ...
    (microsoft.public.windowsxp.configuration_manage)