Re: Can't get to print to an AXIS NPS 550 print server

Tech-Archive recommends: Fix windows errors by optimizing your registry

Thierry H. wrote :
Thank You, Klaus.
You helped me with the 9101, 9102, 9103 port identifications.
I didn't know that. I tried with port 9100 before.

But it still doesn't print. I tried both the following:
- Raw - port number 9101
- LPR - queue name lpt1 both with and without SNMP Enabled: public, device index: 1


You mentioned that an FTP session could be opened to the unit. Output to a printer could be tested using the FTP command "put filename lpt1".

Otherwise you might want to download the configuration settings by using "get config nps550.txt" which saves the settings to a textfile on the computer. Edit the textfile using notepad, and send it back to the printerserver using the "put nps550.txt CONFIG" command (the CONFIG target must be uppercase for the settings to be saved permanently).

I haven't been using an Axis box for more than a decade, but if I remember correctly, the default userid and password is "root" and "pass".


/klaus


.

Relevant Pages