Re: DOS capture to Jetdirect printer

From: Dick Kistler (dickkist_at_nospam-hotmail.com)
Date: 08/11/04 

Date: Wed, 11 Aug 2004 15:29:21 -0400

"bill allemann" <custom4173@sbcglobalDOTnet.invalid> wrote in message
news:usaQejkfEHA.3944@tk2msftngp13.phx.gbl...
> In older versions of Windows, you could capture LPT2 or whatever to a
> network port that was listed the printer port config window. Since this
> was
> a very straightforward and lightening quick thing to set up, I guess
> should
> be no surprise that it was be eliminated in WinXP. :)
> I have a printer on a Jetdirect 170x server that installed OK on the WinXP
> workstation, and I can print to it. I have not, though, been able to find
> a
> syntax that works for redirecting LPT2 to this printer, e.g. NET USE
> LPT2:
> \\SERVERNAME\SHAREDPRINTER ...I saw old postings on this subject that
> said
> the host name had to be used for SERVERNAME instead of the IP number. I
> don't see anything in the Jetdirect config software that sets a host name
> string. The workstation created a port name string derived from the
> print
> driver "ML320TURBO" and this doesn't work either in that spot. I also
> don't
> know if there has to be a string in the SHAREDPRINTER position, and I
> can't
> see anywhere to config that either on the Jetdirect unit. When I print a
> config *** directly from the Jetdirect, it has a hostname = "not
> specified" in the list of network parameters.
> Any ideas?
> thanks
> Bill
>

Perhaps this will help:

http://support.microsoft.com/?kbid=314499

http://members.shaw.ca/bsanders/printfromdos.htm

*** Kistler