Re: Canīt send a fax without having to hang-up the phone

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: Yves Leclerc (yleclercNOSPAM_at_maysys.com)
Date: 05/04/04


Date: Tue, 4 May 2004 09:22:52 -0400

When making a voice call, with a standard fax machine, you can switch modes,
from voice to fax, during the same session without hanging up the line.
However, I have never seems any computer faxing system, Windows or Unix,
which would allow this. The faxing systems always assume that the fax modem
needs to directly call the receiver's fax.

Y.

"Victor D." <anonymous@discussions.microsoft.com> wrote in message
news:eLefb7XMEHA.1032@tk2msftngp13.phx.gbl...
> I wasn't making a point. I was asking a question. And I'm pretty sure
even
> a normal fax machine cannot send a fax while you are on the phone talking
to
> that person. It has to dial the number and comunicate to the other fax
> machine. It cannot do that when the line is in use.
>
> I'm not familiar with WinFax Pro I know the XP fax program cannot. Maybe
> someone else here can help with some anwers for ya.....
>
> "lgoulart" <me@somewhere.com> wrote in message
> news:jlud90prjfv6q2g6peuiu4ms9iabfj42ov@4ax.com...
> > No, thatīs not the point. What Iīm trying to do is, for example, I
> > call someone talk with the person for a while and during the same
> > call, without hanging-up the phone, send a fax to him, like you do on
> > a normal fax machine. Do you got my problem?
> >
> > On Mon, 3 May 2004 20:38:55 -0500, "Victor D."
> > <anonymous@discussions.microsoft.com> wrote:
> >
> > >Why do you want it to not hang up after sending?
> > >
> > >"lgoulart" <me@somewhere.com> wrote in message
> > >news:kand90peckuog4p306sn5gvahgps68t6fc@4ax.com...
> > >> Iīd like to know if itīs possible to send a fax in Winfax Pro 10.03
> > >> whithout having to hang-up the call. It would something like the
> > >> "Manual Receive" function, but instead of receiving it would be to be
> > >> sending the fax.
> > >>
> > >> Tks in advance for any help.
> > >
> >
>
>



Relevant Pages

  • Re: SIP incoming calls in CCM
    ... CCIE R&S, CCIE Voice ... trunk (configured an outgoing dial-peer). ... I'm trying to receive calls from the same SIP trunk, ... session target ipv4:10.1.1.1 ...
    (comp.dcom.sys.cisco)
  • Re: Voicework
    ... I have some voice samples at the link below: ... Does it change session to session, or can you say for any ... how much voice recording experience they have. ... The subtle differences between the various professional mics ...
    (rec.audio.pro)
  • Cisco 1760 and Voice SIP ?
    ... I have a card with 2 FXO port ... For connect this 1760 at my SIP Voice Serveur (Asterisk) ... session target ipv4:192.168.50.15:5060 ... retry response 3 ...
    (comp.dcom.sys.cisco)
  • Re: Please check out my soundclick stuff....
    ... ...where else have I heard your voice? ... You sound real familiar to me... ... Not unless you've been hanging out in some Delaware Valley bars, coffee houses and an occasional Philly or NYC place....very occasional. ...
    (alt.guitar)
  • Re: Voicework
    ... I have some voice samples at the link below: ... Does it change session to session, or can you say for any ... how much voice recording experience they have. ...
    (rec.audio.pro)