RE: Windows Service Pack 2 Error

Dear nass,
I installed SP3 last night with no major problems. I wanted to thank you for
your gracious help. It was greatly appreciated. Your suggestion to delete the
subfolders in Windows/Software Distribution and to execute that .bat file
were extremely helpful. I cleared up about 6.5 G's of hard drive space for
the procedure, which was plenty.
Thank you again.
Sincerely,
Tom

"nass" wrote:



Hi Tom,
Daave is a greate helper in the Ms newsgroups and what he told is a good
advice concerning the Hard drive space, which I didn't know about from you.
If you moved your Docs, Pictures and the data to the other Partition and made
a space then try the Dial a fix tool and install SP3 then IE7.

Does it give you the same Error message or different one?

HTH,
nass
---
http://www.nasstec.co.uk


"Tom B." wrote:

nass,
I took your advice and deleted the subfolders in
C:\WINDOWS\SoftwareDistribution. I ran that .bat file you gave me. I
downloaded all the updates and they downloaded OK. I then attempted to
download SP2 again, and it STOPPED AGAIN 3/4 of the way through! How
frustrating!
I read that page you gave me on Dial-A-Fix. It seems like a potentially
risky tool that could really screw things up. The disclaimers went on for so
long, I just stopped reading. But then again, it also seemed like it had
great potential to solve my problem.
I was thinking now I should maybe take this other responders advice and
download SP3 instead?
What do you know about Dial-A-Fix. I just don't want to create more problems
by running that tool.
Tom B.

"nass" wrote:



"Tom B." wrote:

I have never installed Service Pack 2 because I always get an error 3/4 of
the way through installation. My system has worked fine without it up until
now. Now I'm having real browser problems and stuff.
Every time I have ever attempted to download SP2, the error message code is
Error Code: 0x80070080.
How do I rectify this?
I really want to upgrade my service pack.
Thanks.

Hi Tom,
Open a Run command and type in:
cmd.exe click [OK] on the command prompt type:
net stop wuauserv press Enter Key on your keyboard then type this command:
net stop bits
Type Exit to exit the command prompt.

Open Windows Explorer and locate this folder:
C:\WINDOWS\SoftwareDistribution = delete all subfolders in the right
pane/window.
Note if you can't see this directory try show hidden files and folders from
tools menu.

Run disk clean up and register these command. Try to copy an dpaste into a
Notepad and safe as updates.bat on your Desktop then double click it to
execute the batch file.
regsvr32 wuweb.dll
regsvr32 wuapi.dll
regsvr32 wuaueng1.dll
regsvr32 wuaueng.dll
regsvr32 wups2.dll
regsvr32 wups.dll
regsvr32 wucltui.dll
net start wuauserv
net start bits

Reboot your machine and try the updates. Does it help?

If still no joy try this tool:
Dial-a-fix
http://wiki.lunarsoft.net/wiki/Dial-a-fix

Note: make sure the machine malware/virus free and there is no Security
software interfering with the updates rendering it useless/damaged.

HTH,
nass
---
http://www.nasstec.co.uk

.

Relevant Pages

  • RE: Windows Service Pack 2 Error
    ... advice concerning the Hard drive space, which I didn't know about from you. ... download SP2 again, and it STOPPED AGAIN 3/4 of the way through! ... Open a Run command and type in: ... regsvr32 wuweb.dll ...
    (microsoft.public.windowsxp.perform_maintain)
  • RE: page is disappearing
    ... I did not due the command runs but today I did and they all succeeded but 2 ... one was regsvr32 cryptdig.dll specifed module not found. ... "nass" wrote: ... first download you gave me didn't work I downloaded it but then couldn't find ...
    (microsoft.public.windowsxp.general)
  • RE: Loss of internet explorer functionality
    ... Then Open the Run Command and type this command: ... Cant get the Internet properties up to do all that you ... regsvr32 Sccbase.dll ... Reboot your machine and try to connect and download and scan for malwares ...
    (microsoft.public.windowsxp.help_and_support)
  • RE: page is disappearing
    ... The regsvr32 cryptdlg.dll not cryptdig.dll. ... by opening a run command and type in: ... "nass" wrote: ... first download you gave me didn't work I downloaded it but then couldn't find ...
    (microsoft.public.windowsxp.general)
  • Re: Help..mssecure.cab not updating!
    ... verify that your synctask is INFACT running without any issues? ... catalog, you should remove the unattend switch from the sync cmdline. ... > have the synch utility to download the catalog on a weekly basis. ... > Command line specified package to update on DPs as XYZ00010 ...
    (microsoft.public.sms.admin)