Re: system drive change?
- From: "r0nbo" <mackro@xxxxxxxxxxxxx>
- Date: Wed, 20 Dec 2006 12:50:14 -0600
This computer uses cable select so I put the new drive in the secondary
position to copy the old drive over with the Seagate software. then I
swapped the drives on the cable so the new one was the master drive. I
should have done it from safe mode but I didnt know any better.
"Gerry Cornell" <gcjc@xxxxxxxxxxxxxx> wrote in message
news:exBUleEJHHA.536@xxxxxxxxxxxxxxxxxxxxxxx
I will pull the plug on G sometime when Im adventurous
and see what happens.
Not a good move. It would make more sense to backup
and do a new install having sorted out the hardware.
What can be seen in Disk Management?
When you put in your new drive did you remove your
original disk and put in your new one where your old one
as or did you put it in the second slot as a slave?
--
Hope this helps.
Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
"r0nbo" <mackro@xxxxxxxxxxxxx> wrote in message
news:exN9LiDJHHA.5000@xxxxxxxxxxxxxxxxxxxxxxx
Ok I slept a few hours and the sun is almost coming up so its back to
work at the kitchen table heh. Following links I uninstalled McAfee and
reinstalled it from my account with them and it hasnt BS on me yet but
the morning is young. Time will tell. I do see that it put the old
version of security center on here that I had before some bogus upgrade
they were foisting on us. It was a major PITA getting that thing
configured and I wont do it again although I had it running for months
without major problems. I use Zonealarm for the firewall and it did say
the newer security center doesnt like it but I did get it to work anyway.
Nevertheless the old one is back on here now and I think it will stay. I
still havent found a way to move the system drive status to C from the
old drive at G. I will pull the plug on G sometime when Im adventurous
and see what happens.
"r0nbo" <mackro@xxxxxxxxxxxxx> wrote in message
news:%23ilqtN%23IHHA.1424@xxxxxxxxxxxxxxxxxxxxxxx
I had an older version of this somewhere and didnt know it till I made
shortcut for Autoruns. Anyway it said all this stuff is starting C like
it should. I went to McAfee and got their trouble shooter program and I
may have to uninstall and reinstall the thing tomorrow. Im not gonna mess
with it tonite. Its 9pm here and you should be in bed across the ocean :)
when the sun comes up I will worry about it some more. Thanks for the
replies mate.
"Gerry Cornell" <gcjc@xxxxxxxxxxxxxx> wrote in message
news:OyJ$wl9IHHA.3424@xxxxxxxxxxxxxxxxxxxxxxx
You might use Autoruns to see where McAfee try to start from.
You will need to consider careful how to remove it. It depends
entirely where the start up is to be removed.
Autoruns is a programme, which list everything starting and
where it starts from.Try downloading and installing:
http://www.sysinternals.com/Utilities/Autoruns.html
You can save the output of the Everything tab to a txt file.
Place the cursor on any item in the list and it gives a save
as option on the File drop down. Post a copy of suspect
entries giving details of the start location.
--
Hope this helps.
Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
"r0nbo" <mackro@xxxxxxxxxxxxx> wrote in message
news:%239qJAN9IHHA.4928@xxxxxxxxxxxxxxxxxxxxxxx
Yes I found out that its some mcafee thing and have been trying to
muddle through their tech support crap to rectify it. Time will tell.
Why did it wait till this afternoon to start this stuff when it had
been running fine for days after I installed the new drive? Virus scan
comes up with nothing. I need to sit and hit F8 when I turn it on and
tell it to start in the last known good setting or something and when
it starts if graciously recoginizes the new drive and tells me so. :)
I will keep hacking away till I fix it or get mad and rip the new
drive back out.
"Gerry Cornell" <gcjc@xxxxxxxxxxxxxx> wrote in message
news:uzwO$y8IHHA.2232@xxxxxxxxxxxxxxxxxxxxxxx
http://aumha.org/win5/kbestop.htm
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/DevTest_g/hh/DevTest_g/t05_bugs_60_299217d6-98d1-4d1d-8068-883e89933845.xml.asp
if link broken try
http://snipurl.com/l6o7
naiav5x.sys -this file ,which seems to be the cause of the
problem would be appear to relate to a McAfee product.
What McAfee product was or is installed? How was it
removed, if it was?
--
Hope this helps.
Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
"r0nbo" <mackro@xxxxxxxxxxxxx> wrote in message
news:O4RxNC8IHHA.5000@xxxxxxxxxxxxxxxxxxxxxxx
it just started this stuff while ago and thats why I found the
system drive info. I took a pic of one of the blue screens but dont
know if I can attach a cropped shot here or not. As for reinstalling
the whole works it would be easier to buy a new computer; odd that
the thing ran fine for 7 hours till while ago. as for the drive
letters the old drive is G and the new drive is C and thats where
its booting from according to everything I can findl I suppose I
could yank the power to G(the old drive) and make sure heh heh
bet it wont accept an attachment but it gives a bunch of numbers and
below it says naiav5x.sys address B7D30760, datestamp 42ae0eb6
the stop numbers are always different it seems
"Gerry Cornell" <gcjc@xxxxxxxxxxxxxx> wrote in message
news:u5dfHz7IHHA.1504@xxxxxxxxxxxxxxxxxxxxxxx
You need to sort out the BSOD first.
You are unlikely to be able to be able to change the drive
lettering for the system drive / partition from G. To try to do
so destroys all your registry links. The only way to change
the situation is do a clean install of Windows XP. You have
to back up every data file, reinstall every programme and
locate the software disks and latest drivers for every item
of hardware. Best to leave your system drive as G.
Can you provide a copy of the Stop Error Report?
Disable automatic restart on system failure. This should
help by allowing time to write down the STOP code properly.
Keep pressing the F8 key during StartUp and select option
- Disable automatic restart on system failure.
Do not re-enable automatic restart on system failure until
you have resolved the problem. Check for variants of the
Stop Error message.
--
Hope this helps.
Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
"r0nbo" <mackro@xxxxxxxxxxxxx> wrote in message
news:epVHIc7IHHA.3424@xxxxxxxxxxxxxxxxxxxxxxx
How do I change what System Restore sees as the system drive? I
put in
a bigger drive last week but today am getting BSOD today and
system
restore wont work. For some reason it sees the old drive which is
G:
now as still the system drive and not the C; drive that everything
is
booting from. I am running safe mode just to keep things going
right
now.
.
- References:
- system drive change?
- From: r0nbo
- Re: system drive change?
- From: Gerry Cornell
- Re: system drive change?
- From: Gerry Cornell
- Re: system drive change?
- From: r0nbo
- Re: system drive change?
- From: Gerry Cornell
- Re: system drive change?
- From: r0nbo
- Re: system drive change?
- From: r0nbo
- Re: system drive change?
- From: Gerry Cornell
- system drive change?
- Prev by Date: Re: Finding BootVis.asp
- Next by Date: Re: Screensaver wait time out tab greyed out
- Previous by thread: Re: system drive change?
- Next by thread: Backup Problems
- Index(es):
Relevant Pages
|
