Re: svchost.exe and 100% cpu usage

I tryed that link for Process Explorer v10.2 and it does not work. Page
cannot be found. Any more ideas?

Dale


"GrapesKennedy" <GrapesKennedy@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:13FF95B2-4ED4-4EAC-A4D4-A03F77A2F55D@xxxxxxxxxxxxxxxx
Gerry,

Thanks very much for the assistance. I have downloaded Process Explorer
v10.2 and do not see a "Dependencies" Tab after clicking down to services.
I must be missing it somewhere.

I am still trying to find the culprit, it seems the problem is on log on
and
after a certain period the cpu frees up. Thanks again for the advice, and
I
will post if I find out anything.

Regards,
Ed

"Gerry Cornell" wrote:

Download Process Explorer.

For further information about Process Explorer see here:
http://www.sysinternals.com/ntw2k/freeware/procexp.shtml


To ascertain which service is causing the problem select the svchost
producing the high CPU usage, right click,
select Properties, Services. Note there are the full names and
some explanation of what each service does.


You will find further information on Services here:
http://majorgeeks.com/page.php?id=12


To trace the particular Service involved you need to turn off each
service in turn and then restore it noting what effect it has on CPU
usage. However, you need to take care and watch what other Services are
dependent on that service. When you click on the Dependencies tab allow
it a little time to display the information.



--

Hope this helps.

Gerry
~~~~
FCA
Stourport, England

Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

"GrapesKennedy" <GrapesKennedy@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message
news:0DC6361A-1826-4DA0-84FE-E072F458B093@xxxxxxxxxxxxxxxx
Similar problem to what I have found in these topics, but the various
solutions offered and my limited understanding of services etc have
prevented
me from fixing it. Specifically, running XP HOME SP 2, when a certain
user
logs on, machine very slow, cpu usage 100% by svchost.exe, and it is
utilzing
at least half of the installed RAM. Interestingly enough, it appears
to
be
user specific if that is possible. Checks clean for viruses and
spyware.

If anyone has any suggestions or can point me to a useful KB article
that
can clear this up, would appreciate it. Machine almost useless.
Desire
start to complete and have machine available for use, vice using 100
percent
of CPU to run svchost.exe.

Thanks very much.

Ed





.

Relevant Pages

  • Re: Yet another SVCHOST.EXE posting (my workaround)
    ... SVCHOST.EXE is an important part of Windows. ... Process Explorer you can see which and that is why I asked about the Command ... about the Windows Automatic Update service -a common cause of excessive CPU ... First off I killed PID 1302 and noticed that CPU usage fell down ...
    (microsoft.public.windowsxp.general)
  • Re: Does a Repair Install Affect Performance?
    ... I suggest you try cCleaner. ... CPU shot up to 80%+ for about 12 seconds while it started. ... > IE, iTunes, Microsoft Antispyware and Process Explorer itself. ... >>>> Sometimes CPU usage spikes when lots of apps open, ...
    (microsoft.public.windowsxp.perform_maintain)
  • Re: Does a Repair Install Affect Performance?
    ... When the performance is poor check on CPU for unexplained activity. ... For further information about Process Explorer see here: ... >> Sometimes CPU usage spikes when lots of apps open, ... >>> One file suggests you have a Dell computer. ...
    (microsoft.public.windowsxp.perform_maintain)
  • Re: CPU Spiking every 9 Seconds
    ... Thanx Gerry found process explorer to be a very usefull tool in detecting CPU ... file "stobject.dll" was taking the CPU usage, on killing the thread the usage ...
    (microsoft.public.windowsxp.perform_maintain)
  • Re: svchost.exe and 100% cpu usage
    ... I have downloaded Process Explorer ... v10.2 and do not see a "Dependencies" Tab after clicking down to services. ... after a certain period the cpu frees up. ...
    (microsoft.public.windowsxp.perform_maintain)