Re: XP home does not enter standby



Navastech

Be aware that when you choose standby, any program in memory, including
document revisions, will be lost in the event of a power failure. If you
have a UPS system, continue as you were...

"Navastech" <NavasTech@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:7E06A57D-BBB9-4C62-B3C6-ACC6F837642F@xxxxxxxxxxxxxxxx
I really need some help everyone. New build system with the following
specification:
MSI 975X Platinum Power Up Edition
Pentium D 945 Processor
2 gig of ram
Nvidia GeForce 7600GT
XP home edition

System starts sleep mode and freezes, does not go into standby at all.
I already checked bios and ACPI is enabled on S1 state. All is ok that
I see, i've installed the latest drivers from Nvidia, upgraded the
firmware on motherboard, and even tried re-installing a fresh copy of
Windows XP Home on it. Still no luck. Well, I had luck once, I
installed bootvis program and it did go into standby while testing
system, but it happened only a few times, now it is not working again.


All help is greatly appreciated, i've googled for answer and can't find
a solution so far. PLEASE HELP, thank you so much for reading. Look
forward to responses, thank you.

NavasTech

--
thank you for reading and your help.


.



Relevant Pages

  • XP home freezes when trying to standby
    ... Nvidia GeForce 7600GT ... System starts sleep mode and freezes, does not go into standby at all. ... Well, I had luck once, I ... installed bootvis program and it did go into standby while testing ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: XP home freezes when trying to standby
    ... XP home system does not go into standby, please help, see below. ... System starts sleep mode and freezes, does not go into standby at all. ... Well, I had luck once, I ... installed bootvis program and it did go into standby while testing ...
    (microsoft.public.windowsxp.help_and_support)
  • Rebuild my hard drive?
    ... The system will not go into standby on its own, ... System restore doesn't work, although this could be because I recently ... I did turn off Product Protection in Norton Internet Security, ... Some of the symptoms may have been caused by a power failure, ...
    (microsoft.public.windowsxp.general)
  • Re: standby mode
    ... The other mitigating factor is that in standby the ... system is still just as vulnerable to a power failure or flux as when ...
    (microsoft.public.windowsxp.basics)
  • Re: Does not enter stanby
    ... Usually something running in the background will prevent standby. ... taskmanager for anything running. ... If no luck, shut down/prevent loading of a few programs at a time till ...
    (microsoft.public.windowsxp.general)

Loading