Re: Windows XP Professional suddenly stops and a blue screen with error message appears and could not restart

If you have to let it sit for 30mins, it's likely a overheating problem..


--
Tumppi
=================================
Most learned on these newsgroups
Helsinki, FINLAND
(translations from/to FI not always accurate
=================================




<somangili@xxxxxxxxxxx> kirjoitti
viestissä:1136866483.845911.279500@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> When working in windows XP Professional system it suddently went off.
> A blue screen appears with the following message:
> "A problem has been detected and windows has been shut down to
> prevent damage to your computer
> IRQL_NOT_LESS_OR_EQUAL
> If this is the first time you have seen theis stop error screen,
> restart your computer. If this screen appears again follow these
> steps.
> Check to make sure any new hardware or software is properly
> installed. If this is a new installation, ask your hardware or
> software manufacturer for any windows update you might need.
> If problem continues, disable or remove any newly installed
> hardware or software. Disable Bios memory options such as caching or
> shadowing. If you need to use safe mode to remove or disable
> components, restart your computer, press F8 to select advanced start up
> options, and then select safe mode.
> Technical information:
> STOP: Ox00000000A(Ox3D8BD845,Ox00000002,Ox00000001,Ox804E9D36)
> Beginning dump of physical memory.
> Physcial memory dump complete.
> Contact your system administrator or technical support group for
> further assistance"
> With this message the system stops functioning. I could not restart.
> After this the system stops booting. It starts functioning again if I
> switched off the system and reboot it again after 30 minutes. I am
> terribly confused and irritated. Please help me to come out of this
> mess.
>


.

Relevant Pages

  • Re: PAGE_FAULT_IN_NONPAGE_AREA
    ... Restart the computer and see whether the Stop Error still occurs. ... In Device Manager the Network Card appears under Network Adapter. ... Don't forget the problem could be hardware not software. ... Requested data was not in memory. ...
    (microsoft.public.windowsxp.general)
  • Windows 2000 Service Pack 4
    ... >now I just automatically toss in the boot disk, ... >cylclic restart, ... >Hardware drivers without one of their premium Dear to ... If this is a new installation, ...
    (microsoft.public.win2000.windows_update)
  • Re: Windows installation problem. Help.
    ... 2004 Windows MVP "Winny" Award ... tries to read the memory, can't find it, generates a processor fault, ... This Stop message usually occurs after the installation of faulty hardware ...
    (microsoft.public.windowsxp.general)
  • Re: Bluescreen of startup
    ... One question - if I re-install XP all my data ... If this is the first time you've seen this stop error screen, restart your ... Check to make sure any new hardware or software is properly installed. ... If this is a new installation, ask your hardware manufacturer for any ...
    (microsoft.public.windowsxp.general)
  • Re: Bluescreen of startup
    ... (with the blue bars scrolling)...it never gets to the logon screen. ... If this is the first time you've seen this stop error screen, restart your ... Check to make sure any new hardware or software is properly installed. ... If this is a new installation, ask your hardware manufacturer for any ...
    (microsoft.public.windowsxp.general)