Re: Windows XP Professional suddenly stops and a blue screen with error message appears and could not restart



When it restarted did the message appear again? If it didn't - don't worry
about it/

If it did, then it appears you have a hardware problem: motherboard, cpu,
memory, etc and that is not the fault of Windows. You need to ask the pople
that made the computer.

<somangili@xxxxxxxxxxx> wrote in message
news:1136866483.845911.279500@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> When working in windows XP Professional system it suddently went off.
> A blue screen appears with the following message:
> "A problem has been detected and windows has been shut down to
> prevent damage to your computer
> IRQL_NOT_LESS_OR_EQUAL
> If this is the first time you have seen theis stop error screen,
> restart your computer. If this screen appears again follow these
> steps.
> Check to make sure any new hardware or software is properly
> installed. If this is a new installation, ask your hardware or
> software manufacturer for any windows update you might need.
> If problem continues, disable or remove any newly installed
> hardware or software. Disable Bios memory options such as caching or
> shadowing. If you need to use safe mode to remove or disable
> components, restart your computer, press F8 to select advanced start up
> options, and then select safe mode.
> Technical information:
> STOP: Ox00000000A(Ox3D8BD845,Ox00000002,Ox00000001,Ox804E9D36)
> Beginning dump of physical memory.
> Physcial memory dump complete.
> Contact your system administrator or technical support group for
> further assistance"
> With this message the system stops functioning. I could not restart.
> After this the system stops booting. It starts functioning again if I
> switched off the system and reboot it again after 30 minutes. I am
> terribly confused and irritated. Please help me to come out of this
> mess.
>


.



Relevant Pages

  • Re: Crashes and the Blue Screen of Death!
    ... but the most common cause is hardware failure. ... The most common cause of this is hardware memory corruption. ... are listed on the Windows 2000 Hardware Compatibility List. ... recommended that all users install them as they become available. ...
    (microsoft.public.win2000.general)
  • Re: error restarts intermittently
    ... A problem has been detected and windows has been shut down to prevent ... And text about newly installed hardware or software, ... Device manager is good. ... The system attempted to access pageable memory using a kernel process ...
    (microsoft.public.windowsxp.perform_maintain)
  • Re: PAGE_FAULT_IN_NONPAGE_AREA
    ... Restart the computer and see whether the Stop Error still occurs. ... In Device Manager the Network Card appears under Network Adapter. ... Don't forget the problem could be hardware not software. ... Requested data was not in memory. ...
    (microsoft.public.windowsxp.general)
  • Re: Windows installation problem. Help.
    ... 2004 Windows MVP "Winny" Award ... tries to read the memory, can't find it, generates a processor fault, ... This Stop message usually occurs after the installation of faulty hardware ...
    (microsoft.public.windowsxp.general)
  • Re: BAD_POOL_HEADER blue screen of death
    ... The "pool" referred to is a memory pool. ... > Also, I installed no new hardware, except for some more memory. ... >> Here is a MSDN article with regard to this error in Windows 2000. ... >> the error reporting tool will get this for you. ...
    (microsoft.public.windowsxp.perform_maintain)