RE: fan

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: M. Rajesh (mrajesh24_ns_at_nospam.hotmail.com)
Date: 08/24/04 

Date: Mon, 23 Aug 2004 18:43:04 -0700

Hi,

There seems to be a problem with the heat sink, which is vital for the
cooling.
take the motherboard to a qualified technician and get it checked and
repaired by them, they wil put the right amount of heat sink and also adjust
hte fan so that it gets cooled properly.

Regards
M. Rajesh
.Net and Windows Shell MVP
www.winxpsolution.com.

"jeff" wrote:

> I have a compaq ez2200 that would shutdown due to cooling
> fan not running which i know the motherboard causes this
> to happen when it gets hot, i installed a newer power
> supply and fan and it did run for awhile but not right
> away when i started the pc. it should always run but it's
> not so i tried another fan and still doesn't run what
> could be the problem.
>

Relevant Pages

  • Re: Cpu sheddies to the bridge, please
    ... The program Core Center informs me that the cpu fan is not running, ... Take the fan off the heat sink NOT THE HEAT SINK OFF THE MOTHERBOARD ... It's the system fan not the processor fan, so there's no need to touch the fan on the processor. ...
    (uk.rec.sheds)
  • Re: Cpu sheddies to the bridge, please
    ... an clue, myself. ... The "cpu" fan is ... Take the fan off the heat sink NOT THE HEAT SINK OFF THE MOTHERBOARD ...
    (uk.rec.sheds)
  • Re: Enclosure for electronic speed controller ????
    ... others a mix of varous DC voltages, and installing a fan in a acrylic ... thinking of how much space I need to allow around the enclosure I ... My chassis is 2" high from the back plate, (not counting the heat sink ... The same controller could run a 90v DC motor and/or one with ...
    (rec.crafts.metalworking)
  • Re: Boot process not starting
    ... lucky because all I'm trying to do now is update this XP Pro desktop with a new motherboard, cpu and video adapter and I can't get it to work. ... No I haven't looked at the socket contacts carefully because I used the last of my Arctic Silver thermal paste for re-assembling after checking the cooler fan pushpins but I will have to have another look at this. ... and the memory controller is set up. ... a microcontroller inside them. ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: Boot process not starting
    ... with a new motherboard, cpu and video adapter and I can't get it to ... This repeats for as long as the power is on. ... the cooler fan pushpins but I will have to have another look at this. ... and the memory controller is set up. ...
    (alt.comp.hardware.pc-homebuilt)