Re: system locks up

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: Mae (anonymous_at_discussions.microsoft.com)
Date: 08/06/04


Date: Thu, 5 Aug 2004 17:19:56 -0700

If you haven't solved your problem, and if you haven't
already checked, go to Control Panel > Performance and
Maintenance > Administrative Tools > Event Viewer (open
it and click) System (over on the left). Do you see on
the right an error pointing to ACPI as the source of the
problem? If so, double click the error entry to see what
the error description is. Perhaps you have the problem
of something trying to read an illegal port that falls
within a protected group of ports. My just abandoned
computer did, and I have been unable to obtain an updated
BIOS, and it is not worth replacing the motherboard in
the computer. It was freezing every few minutes, and the
only way I could get control was to turn the power off.
 
>-----Original Message-----
>I recently upgradedmy system to Windows XP Pro and
>noticed that after my computer is on for a while and
>sometimes all night it will freeze up and I have to
power
>down by pulling it's power source and rebooting
>afterwards. Keyboard and mouse are inoperative unless I
>do this.
>
>Any suggestions?
>.
>



Relevant Pages

  • Re: Hang up after 15 minutes of inactivity
    ... In Start, Control Panel, Power Options I ... la vostra regolazione per startUp scrive dentro i servizi a macchina per il servizio di indexing - inizi, attrezzi amministrativi, servizi? ... I think they correspond to Hibernation and it is DISABLED. ...
    (microsoft.public.windowsxp.perform_maintain)
  • Re: Help Regarding STANDY Mode!!
    ... You are asking for it because 'Rock' has pounced on 2 people multi-posting ... but when I press the power off button after this change the OS ... change the setting in control panel and also Y the OS hangs!! ...
    (microsoft.public.windowsxp.general)
  • Re: PowerWare 9110 UPS schematic??
    ... Google returns a number of hits for manuals. ... With the unit powered up, press and hold the power on switch/button ... but not in the control panel end. ...
    (sci.electronics.repair)
  • Re: SPST On-Off Pushbuttons
    ... Ron wrote: ... Another source would be a shop that specialises in supplying commercial control panel parts, such as are used in factories, IT distribution panels, etc. ... SPST bat-handle switches - the position of the handles will show power on/off. ... wire LEDs in parallel to the track power.)You'll need a dropping resistor to prevent the LED to fatally overindulge in power. ...
    (rec.models.railroad)