Re: Please Help

Tech-Archive recommends: Fix windows errors by optimizing your registry

From: Rocket J. Squirrel (rocky_at_bullwinkle.com)
Date: 05/15/04 

Date: Fri, 14 May 2004 22:42:35 -0400

Try using a different monitor. Is the picture good? Then your original
monitor needs to be replaced.

Is the picture just as bad with a different monitor? Then restart Windows in
Safe Mode. Is the problem solved? Then you need to reinstall the driver for
your video card (or upgrade to the latest version of your video card
driver.)

Is the picture just as bad in Safe Mode? Then your video card needs to be
replaced.

Rocky

"Jon" <Jon_Earley@wowmail.com> wrote in message
news:d78501c43a1f$c744ab60$a301280a@phx.gbl...
> Everything on my screen is smeared across my screen. lines
> going through everything. Please help

Relevant Pages

  • home built pc troubles
    ... the cpu fan goes, but there's no picture coming on ... the monitor, the HD's don't spin, and the cd drive won't open. ... GeForce FX 5200 video card ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: Whats a good low-end video card that works well with Linux?
    ... >> Basically I want it to give me the best quality picture doing just ... I do have a newer video card, a FoxConn for a P4 3GHZ. ... > quality, but I'm not obsessed with exact color fidelity. ... going on for some time and the monitor is pretty good quality, ...
    (comp.os.linux.hardware)
  • Re: OT - HDTV
    ... The new monitor has a better picture than my old Viewsonic ... 21" CRT monitor, ... This is probably an issue with your video card. ...
    (rec.outdoors.rv-travel)
  • Re: Another Zaxxon question
    ... the picture starts to fold over at the edges too. ... That's the red, green and blue signals, and the sync signal to the monitor, from the game board. ... The good news is that this is made immensely easier thanks to the fact that you can buy a "cap kit" for $10-$15 that has all the capacitors you need to replace the existing ones, and a chart to tell you where they all go. ... All you need is a few screwdrivers, a homemade picture tube discharging tool, a soldering iron, solder sucker and some solder. ...
    (rec.games.video.arcade.collecting)
  • Re: Problem configure 2560x2048 resolution
    ... The only possibility is SAX2.When I told "manually" I was looking in the opened SaX2 window. ... On the same line where is word Monitor, next right is the model, and on the ... like cutting very wide picture in a half to fit it in two ...
    (alt.os.linux.suse)