Re: need to know

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

From: "Wesley Vogel" <123WVogel955@xxxxxxxxxxx>
Date: Fri, 12 Jan 2007 11:27:47 -0700

if i use the ethernet will the cable network card work?

Your NIC (network interface controller) or network card should have an
ethernet Category 5 UTP cable connection. It looks like an oversized
telephone plug/jack. Your DSL modem should also have that type of
connection and also a USB connection. Use the ethernet Category 5 UTP cable
connection on both.

Just use a CAT 5 cable between the DSL modem and the network card.

Look at the instructions for both your DSL modem and the network card.

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In news:charcborn.2kadwv@xxxxxxxxxxxx,
charcborn <charcborn.2kadwv@xxxxxxxxxxxx> hunted and pecked:

I was using cable network now i have dsl modem do i have to get another
network card for dsl this moden has usb and ethernet if i use the
ethernet will the cable network card work?

--
charcborn

References:
- need to know
  - From: charcborn

Prev by Date: Re: Product Key
Next by Date: Re: How should I buy XP Pro?
Previous by thread: Re: need to know
Next by thread: Re: Hard drive problem
Index(es):
- Date
- Thread

Relevant Pages

Re: ethernet connection wont work
... the Westell "DSL modem" (which actually includes a router) is configured. ... The Westell has a single Ethernet connector but the Linksys probably has ... Area Connection." ...
(microsoft.public.windowsxp.network_web)
Re: ethernet connection wont work
... The Ethernet cable connects differently to the Linksys depending on how the Westell "DSL modem" (which actually includes a router) is configured. ... If you now go to Control Panel> Network and Internet Connections> Network Connections on your laptop, you should see the icon for "Local Area Connection." ...
(microsoft.public.windowsxp.network_web)
Re: DSL and no Appletalk
... Phone line to dsl modem to WAN port on second router. ... All the other ethernet connections go to the LAN on the second router. ... Wireless requires Airport Express hub connected to LAN by ethernet for Mac. ... It works just like the cable modem with the replacement of the cable connection with an activated phone line. ...
(comp.sys.mac.printing)
Re: ethernet connection wont work
... If you only have one "DSL modem" and no other networking device, does your DSL modem have an antenna? ... connection directly from internet connection on back of router to computer via ethernet, I can connect to my wireless connection (IP Adress shows 192.168.1.103 signal strength excellent. ... When remove the ethernet cord from the computer and connect to the dsl modem there is no light on the ethernet connection there nor when I go from the dsl modem to computer via ethernet cord. ...
(microsoft.public.windowsxp.network_web)
Re: lossof browser
... Connection to DSL is ethernet and the ethernet does not show a ... >>> I have the browser working fine then it is lost. ... No connection even ... The physical connection to the DSL modem - ethernet or usb? ...
(microsoft.public.windowsxp.basics)