Re: Internet Explorer blocking
Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance
"Lucca" <Lucca@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:E0E129B0-5D4D-4BA4-A89C-F7EF3CFEA449@xxxxxxxxxxxxx
I have upgraded from Windows 98 to Windows XP. Now when I go on the
Internet using IE, after a couple of minutes the browser stops
working, saying that the site is unavailable. No error messages come
up from the Modem (ADSL), and it doesn't disconnect.
Is there anything I can do to resolve this problem ?
Many thanks for any help
You probably have malware installed.
Malware Removal:
http://www.elephantboycomputers.com/page2.html#Removing_Malware
--
Frank Saunders, MS-MVP OE
Please respond in Newsgroup only. Do not send email
http://www.fjsmjs.com
Protect your PC
http://www.microsoft.com./athome/security/protect/default.aspx
http://defendingyourmachine.blogspot.com/
.
Relevant Pages
- Re: Windows XP Fax
... I have a line from ADSL Modem going into splitter ... Remember that DATA/FAX modem must be hooked to the PHONE jack ... You CANNOT fax using a DSL modem. ...
(microsoft.public.windowsxp.print_fax) - Re: WiFi ADSL Modem Router thingy as a Router for a Cable Modem?
... >> I've Set up quite a few Systems for people who have an ADSL Broadband ... >> Internet Connection, using a normal, standard BT ADSL-Enabled Phone ... > The WAP without ADSL router has one ethernet port which connects to ... I thought that they (the ADSL Modem Router things) ...
(uk.people.silversurfers) - Re: FC2 and Alcatel Speedtouch
... I had also a lot of problems setting up the alcatel speedtouch modem 4 FC2. ... copied this file to /lib to easier start ADSL at boot time ... Now u need a special version of pppd, because the one shipped with FC2 does ...
(Fedora) - Re: Windows XP Fax
... I have a line from ADSL Modem going into splitter ... You CANNOT fax using a DSL modem. ...
(microsoft.public.windowsxp.print_fax) - Re: Max ADSL and domestic wiring
... Then connect all the xtension cables/socket to the insertion displacement connectors on the back of the new faceplate.If necessary to a new socket next to it. ... Than get a very long RJ11 extension cable and plug your modem directly into the ADSL socket on the front of the master socket. ... You will however always find that wherever you put your 56k modem you will only get slow speeds due to the filters and the fact that the ADSL equipment in the exchange can mess up the residual digital signals that the 56k modems use. ... Is it likely to be reducing my bandwidth? ...
(uk.telecom.broadband) |
|
