Re: Files=40 on an XP PC
Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance
On Fri, 17 Jun 2005 07:26:13 -0400, Husky <cbminfo@xxxxxxxxx> wrote:
>On Thu, 16 Jun 2005 18:38:01 -0700, "Shell Answer Man"
><ShellAnswerMan@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
>
>Junk the program and the config.sys. COM2 you'd have to physically stick a
>modem on port 2, and way too much hardware settings to go into. com2 isn't the
>normal modem port. com1 is.
Nah,
COM1 used to be the mouse, COM3 was the modem.
MH
remove -bats- to reply
.
Relevant Pages
- Re: OPA0 Console connection
... COM1 and COM2 don't always map the same ... :disables login from that port, so that is not the right approach. ... and which will receive the connection. ...
(comp.os.vms) - Re: serial port interfaced EEPROM reader no longer detected after temporary removal
... I wonder if the original instance of COM1 got set to be COM2? ... In the advanced options I looked at the possibility to rename the port, and noticed that COM2 has behind it, but as far as I know I don't have COM2 on my system. ... The manufacturer of the EEPROM reader tells me that the software scans for available serial ports and you can set one that is available. ...
(microsoft.public.windowsxp.hardware) - Re: serial port interfaced EEPROM reader no longer detected after temporary removal
... But the craziest thing is that nowhere do I see COM2 except in the rename option for COM1. ... In the advanced options I looked at the possibility to rename the port, and noticed that COM2 has behind it, but as far as I know I don't have COM2 on my system. ... The manufacturer of the EEPROM reader tells me that the software scans for available serial ports and you can set one that is available. ...
(microsoft.public.windowsxp.hardware) - Re: contolling com2 under compact framework
... 'System.IO.FileNotFoundException' at output.But i can see "COM1:" under ... You need to know how your hardware is configured so you know what port you ... I set serialport1 to com1.And haven't been change the other settings. ... When i want to access com2 using serail port component under compact ...
(microsoft.public.windowsce.embedded) - Re: Activesync stopped connecting
... removing your modem then use COM1 so there is no issue of conflicting ... use of resources and use a real com port. ... I have also tried com1. ... I have an internal modem ...
(microsoft.public.pocketpc.activesync) |
|
