Building my own PC
From: Lou (lou.lupoli_at_blueyonder.co.uk)
Date: 05/01/04
- Next message: Peter Hutchison: "Re: login security"
- Previous message: Peter Hutchison: "Re: C++ & C#"
- Next in thread: Rick \: "Re: Building my own PC"
- Reply: Rick \: "Re: Building my own PC"
- Reply: Nick Burns: "Re: Building my own PC"
- Reply: Lou: "Building my own PC"
- Messages sorted by: [ date ] [ thread ]
Date: Sat, 1 May 2004 02:57:25 -0700
Having built a PC for my son (first attempt), I am having
difficulty loading WIndows XP onto the system.
Booting from the CD, It goes so far before I get the
following message about 2 minutes into the whole process:
"A problem has been detected and windows has shut down to
prevent damage to your computer
PAGE_FAULT_IN_NONPAGED_AREA
If this is the first time you've seen this stop error
screen, restart your computer. If the screen appears
again, follow these steps:
Check to make sure that any new hardware or soft ware is
properly installed. If this is a new installation, ask
your hardware or software manufacturer for any windows
you might need.
If problems persist, disable or remove any newly
installed hardware or software..... (it goes on a bit
here with advice about removing devices, which I've done)
Technical information
***STOP:0x0000007F (0x0000000A, 0x00000000, 0x00000000,
0x00000000)"
I've followed most of the instructions except for
updating drivers which I wouldn't know how to do if there
is no OS on the hard drive! Help
LOU
- Next message: Peter Hutchison: "Re: login security"
- Previous message: Peter Hutchison: "Re: C++ & C#"
- Next in thread: Rick \: "Re: Building my own PC"
- Reply: Rick \: "Re: Building my own PC"
- Reply: Nick Burns: "Re: Building my own PC"
- Reply: Lou: "Building my own PC"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
|
