Re: Good wireless signal - but browser cannot find it?

D'oh!
Forgive my incompetence.

Here is the route.txt: (The Fuzz is his PC name)

C:\Documents and Settings\The Fuzz>route print
===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x20002 ...00 16 e3 88 17 2d ...... Atheros AR5006X Wireless Network Adapter
- P
acket Scheduler Miniport
0x20004 ...00 0d 56 6c e6 c4 ...... Broadcom 440x 10/100 Integrated
Controller -
Packet Scheduler Miniport
===========================================================================
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.2 20
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.168.1.0 255.255.255.0 192.168.1.2 192.168.1.2 20
192.168.1.2 255.255.255.255 127.0.0.1 127.0.0.1 20
192.168.1.255 255.255.255.255 192.168.1.2 192.168.1.2 20
224.0.0.0 240.0.0.0 192.168.1.2 192.168.1.2 20
255.255.255.255 255.255.255.255 192.168.1.2 20004 1
255.255.255.255 255.255.255.255 192.168.1.2 192.168.1.2 1
Default Gateway: 192.168.1.1
===========================================================================
Persistent Routes:
None

It seems to have copied/pasted a bit askew - but the numbers are still in
their relevant columns. Hope this makes sense to you.

Continued thanks for your diligence.
Best wishes, Shd

"Steve Winograd" wrote:

On Mon, 10 Nov 2008 06:52:08 -0800, shoulderhead
<shoulderhead@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
You're welcome, Shd, and thanks for giving the test results. They
show that your wireless network connection is getting the right
settings from your Netgear router, but it isn't able to access sites
on the Internet.

Can the computer ping the router? Try this command:

ping 192.168.1.1

Since the Norton Firewall is installed, make sure that the Windows
Firewall is turned off.

Resetting TCP/IP might help. Type this command, then reboot:

netsh winsock reset

If none of that helps, please post a copy of the computer's route
table. Enter this command, then copy/paste the contents of the
"route.txt" file:

route print >route.txt

Hello again Steve,
Thanks for your patience.

Not such good results, this time.

Couldn't ping router - request timed out 4 times - Packets sent = 4,
Received = 4, Lost = 4, (100% Loss)

TCP/IP reset and rebooted. No change noted.

No firewall conflicts present.

But when I gave the command to see the route table, the text box briefly
flashed on the screen and then disappeared. I tried this several times but
without success. The text box appears full, but stays on screen for a
fraction of a second and then disappears. No chance to copy and paste - or
even read it.

Could this disappearing screen be a clue?
Thanks again for your help so far
Best wishes, Shd

Type the "route" command in the same command prompt window that you
use for the "ping" commands.
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional Program
http://mvp.support.microsoft.com

.

Relevant Pages

  • Re: Problem setting up wireless lan connection
    ... >This is the output of iwconfig and ifconfig: ... you do the iwconfig command include "essid bosschaert". ... load the kernel module for the wifi card. ... You must use the route command to provide what ...
    (comp.os.linux.networking)
  • Re: IP FORWARDING IPTABLES
    ... I choose to configure my firewall to route packets in a different ... except that the '/sbin/route' command has nothing to do with the ... but has a "-I" option to use ICMP echos. ...
    (comp.security.firewalls)
  • Re: Good wireless signal - but browser cannot find it?
    ... Realise that the route text I pasted came out a bit hard to read. ... Here is a Microsoft Word copy which lays the numbers into their correct ... Packet Scheduler Miniport ... Type this command, then reboot: ...
    (microsoft.public.windowsxp.network_web)
  • Re: Good wireless signal - but browser cannot find it?
    ... Realise that the route text I pasted came out a bit hard to read. ... Here is a Microsoft Word copy which lays the numbers into their correct ... Packet Scheduler Miniport ... Type this command, then reboot: ...
    (microsoft.public.windowsxp.network_web)
  • Re: help need to get on internet
    ... but surf the internet. ... > I am posting output of route and ifconfig commands. ... > I can do nslookup for pretty much anything. ... > Output of ifconfig eth0 command is as follows ...
    (Fedora)