Re: Adding a wireless router

From: James Egan <jegan@xxxxxxxxx>
Date: Sat, 10 May 2008 18:22:30 +0100

On Sat, 10 May 2008 07:02:32 -0400, "Jim" <jrwolfe@xxxxxxxxxxx> wrote:

The Linksys router address is 192.168.1.1 which I can access.
Accroding to the manual, the Belkin router address is supposed to be
192.168.2.1 which I can't access
PC addresses start at 192.168.1.100, etc
I can ping all except 192.168.2.1

The Belkin is working just fine with my wireless laptop. However I would
like to be able to access this router in the event I need to reconfig it
sometime in the future.

Leave the linksys at 192.168.1.1 mask 255.255.255.0

Leave the PC's at 192.168.1.100 and upwards (mask 255.255.255.0)

Change the belkin to 192.168.1.2 mask 255.255.255.0

Turn dhcp on the Belkin off.

Plug the Belkin into a LAN port on the Linksys.

Jim.

.

Follow-Ups:
- Re: Adding a wireless router
  - From: Jim

References:
- Adding a wireless router
  - From: Jim
- Re: Adding a wireless router
  - From: James Egan
- Re: Adding a wireless router
  - From: Jim
- Re: Adding a wireless router
  - From: James Egan
- Re: Adding a wireless router
  - From: Jim

Prev by Date: Re: Home Wireless Networking and File Sharing
Next by Date: Re: D-Link Modem Not Working With One Computer
Previous by thread: Re: Adding a wireless router
Next by thread: Re: Adding a wireless router
Index(es):
- Date
- Thread

Relevant Pages

Re: Two router network
... I don't seem to be able to find my Belkin Router now though. ... This is normal, since you aren't using the WAN port anymore, the Belkin ... D-link's DHCP range. ... (Hitting reset on the Belkin will re-enable the DHCP server, ...
(Ubuntu)
Re: linking 2 wireless routers
... >the belkin router has gone back as it doesn't support wds, ... My Belkin F5D7230-4 might support WDS as it says: ... "Wireless Bridging or Wireless Distribution System is used to ...
(alt.internet.wireless)
Re: Configuring wireless router question
... Under Windows everything works fine with the Belkin router. ... WEP or WPA? ...
(comp.os.linux.networking)
Re: Two router network
... I don't seem to be able to find my Belkin Router now though. ... This is normal, since you aren't using the WAN port anymore, the Belkin ... D-link's DHCP range. ... (Hitting reset on the Belkin will re-enable the DHCP server, ...
(Ubuntu)
Re: Adding a wireless router
... Sorry but I can't access the Belkin. ... the Belkin router address is supposed to be ... Leave the PC's at 192.168.1.100 and upwards (mask 255.255.255.0) ... Plug the Belkin into a LAN port on the Linksys. ...
(microsoft.public.windowsxp.network_web)