Re: D-Link Modem Not Working With One Computer

Tech-Archive recommends: Speed Up your PC by fixing your registry




On Thu, 8 May 2008 14:53:03 +0300, "Tomi Häsä" <tomi.hasa@xxxxxxxxx>
wrote:

so is my HP laptop blocking the MAC address of the D-Link modem router or
something similar?

Possibly the other way round.

Check that the wireless encryption settings are the same on both
laptops.

Connect to the router with the laptop that works and check what
wireless settings are required and if mac access control is enabled.

What response do you get from

ipconfig /all


Jim.

.



Relevant Pages

  • Re: No connection to internet on wireless
    ... Oh and the internet has come back to the 3rd ... The laptops are an old ... need the software for the router installed on my pc if I am going to connect ... on most routers there is a reset button. ...
    (microsoft.public.windowsxp.general)
  • Re: A second subnet
    ... I gather I will have to disable DHCP on the 2nd router and give the ... with regards the linksys access point and your previous response:- ... Unless you put the laptops on the same subnet as ... access to the existing network resources, but still allow them access to the ...
    (microsoft.public.windowsxp.network_web)
  • Re: A second subnet
    ... only certain machines based upon IP address. ... You wouldn't have to disable DHCP on the second router as long as you ... configure its LAN settings to be on a different subnet. ... Then new laptops could connect to the existing ...
    (microsoft.public.windowsxp.network_web)
  • Re: acer aspire one - wireless ethernet
    ... The laptops use dhcp. ... connection to the router and it has a static IP address. ... Everything except for the laptops has a static IP address. ... from the Acer after copying a large file and losing the connection, ...
    (Fedora)
  • Re: A second subnet
    ... router on a different subnet (installing the router to a switch in the new ... Make sure the router's LAN settings are for a different subnet. ... You can use the XP SP2 firewall to prevent access to existing machines from ... and enable DHCP on the router, how can I be sure that the new laptops will ...
    (microsoft.public.windowsxp.network_web)