Re: Peer-to-peer conn. problem
- From: "Peter Chatterton" <DELETEpeter@xxxxxxxxxxxxxxx>
- Date: Sun, 10 Feb 2008 11:11:21 -0500
Thanks guys, I appreciate your responses.
I manually configured the lan connections' TCP/IP to 192.168.0.1 &
192.168.0.2 with 255.255.255.0 and the Repair command works on both.
All firewalls are off, there's no active virus checking.
Each PC has sent and rec'd a few hundred bytes.
The PC that's connected to the inet (HP) sees the other one (FUJ)
in My NW Places but FUJ doesn't see HP.
I tried running NW Setup Wiz on HP but it wants an internet connection.
I don't want to do this with the firewalls down.
Turning on the firewalls to send this didn't help with the lan.
What should I do?
Peter
"Peter Chatterton" <DELETEpeter@xxxxxxxxxxxxxxx> wrote in message news:%2300xIevZIHA.1208@xxxxxxxxxxxxxxxxxxxxxxx
I have an XP pro SP2 which I'm trying to connect to a tablet PC,
peer-to-peer, with anEthernet cross-over using a realtek NIC on the XP.
They both have a workgroup named MSHOME.
On the tablet, under Explorer>MS Windows Network, there are entries for both PCs.
On the XP, network setup wizard runs okay
but selecting MSHOME under Explorer>MS Windows Network, gives:
"Mshome is not accessible -- maybe need permission."
"List of servers for this workgroup is not avail."
Hope you can help,
Peter
.
- Follow-Ups:
- Re: Peer-to-peer conn. problem
- From: Peter Chatterton
- Re: Peer-to-peer conn. problem
- References:
- Peer-to-peer conn. problem
- From: Peter Chatterton
- Peer-to-peer conn. problem
- Prev by Date: Re: system information
- Next by Date: setting up network problem
- Previous by thread: Re: Peer-to-peer conn. problem
- Next by thread: Re: Peer-to-peer conn. problem
- Index(es):
Relevant Pages
|
