Re: No access to one computer

Tech-Archive recommends: Fix windows errors by optimizing your registry

On Tue, 15 Jan 2008 18:51:51 +1030, "Frank Oz"
<frank_sa59@xxxxxxxxxxx> wrote:
XP Professional, networked workgroup, Netgear router

I have a network with 4 computers all work well except one comp. name PC1

With PC1 I have access to all computers on cable or wifi

None of the others comp. (than PC1) have access to PC1 and that's the
problem.

When I try to access PC1 I get the following message when addressing drive
D
on PC1:

\\pc1\d is not accessible . you might not have permission to use this
network resource. contact the administrator of this server to find out if
you have access permissions

Not enough server storage available to process this command

I have reloaded PC1 and it was OK, but the problem came back again.

I have upgraded the LAN card driver

I have upgraded the router software Netgear DG834PN

I had overheating problems with router that is fixed with a fan on it

No problems to access the internet

I would be grateful if any one could help me please

The "Not enough server storage" message misleading. The problem is
probably that an antivirus program has changed an obscure TCP/IP
setting. Please see this Microsoft Knowledge Base article for a
likely solution, specifying a value of 15 for IRPStackSize on PC1:

Antivirus Software May Cause Event ID 2011
http://support.microsoft.com/?scid=kb;en-us;177078

Thanks Steve

I have changed value of 15 for IRPStackSize on PC1

Still the same , no change at all

I agree perhaps antivirus program has changed an obscure TCP/IP

You're welcome, Frank. I'd try higher values, as described in the KB
article.
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional Program
http://mvp.support.microsoft.com
.

Relevant Pages

  • Re: RDC for Dummies
    ... At home you must access the office public IP address and also make sure the router/firewall has forwarded the port 3389 to the PC2. ... How to Setup Windows, Network, VPN & Remote Access on ... I created on PC1 a *.rdc file that produces an active RDC connection when I bring PC1 to the office and connect via an ethernet cord. ... running on both PC1 & PC2 'netstat -a' shows that both computers are listening on port 3389. ...
    (microsoft.public.windowsxp.work_remotely)
  • Re: Network no access to one comp.
    ... Again & again checked the router but all normal and blocking of comp. ... Does your Router employ use of the Network Filter, ... I have a network with 4 computers all work well except one comp. ... With PC1 I have access to all computers on cable or wifi ...
    (microsoft.public.windowsxp.help_and_support)
  • Peer to Peer not working
    ... I have two computers linked NIC to NIC by a CAT5 crossover network ... Network/Home' I can 'see' both PC1 and PC2 on both computers. ...
    (microsoft.public.windowsxp.network_web)
  • Re: No access to one computer
    ... I use only AVG Anti- Virus and that has no firewall ... This problem started when I had Vista running on an other comp. ... So 3 weeks ago I reloaded the PC1 and all worked fine but the problem came ... the use of the network browser, ...
    (microsoft.public.windowsxp.network_web)
  • Windows XP Networking
    ... I am building a home office network for a client. ... XP home (PC2), a laptop running XP professional (PC3). ... PC1 connects to the router via an internal Ethernet card. ...
    (microsoft.public.windowsxp.help_and_support)