Re: Access the share folder but windows send HTTP connect to targe

If other computers can access the host but your, it could be a security software running on the host computer. try to start the host and your computer clean booting. This how to may help,

How to run Windows OS with a clean ...With MSCONFIG, you also can configure a clean boot to disable common startup ... To perform a clean boot, please follow these steps: 1) Run MSCONFIG.EXE. ...
www.chicagotech.net/netforums/viewtopic.php?t=57


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com


"Kelvin You" <KelvinYou@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:AD756257-5EBA-4440-805E-042F92DB5931@xxxxxxxxxxxxxxxx
Sure, the sharing folder is on another host, everyone expect me could access
it in our LAN. If I enter "\\10.74.52.11" in the "Run" window, windows will
send "TCP-syn" to the 80 port of the host '10.74.52.11', of course, this is
unreachable.

"Robert L. (MS-MVP)" wrote:

After re-install the ""File and Printer Sharing for Microsoft Network", have
you re-enable sharing on the shared folders? please post back with the
result.

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com


"Kelvin You" <KelvinYou@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:030F25C8-FE5E-4088-AEDE-7B1ACCCFB5FB@xxxxxxxxxxxxxxxx
> Previously, my system worked normally. Today, I uninstalled the "File > and
> Printer Sharing for Microsoft Network" by mistake, and click the > "close"
> button in the right corner of connection property dialogbox > immediately,
> but
> the dialogbox is hangup, so what can I do is rebooting the PC.
> But thereafter, I never can access the share folder of the other PC,
> even if I uninstall & re-install the ""File and Printer Sharing for
> Microsoft
> Network". It always report the "\\10.74.52.11 The network path was > not
> found." or some word like "\\10.74.52.11 The network can not reached".
> I capture the packet from the network interface, and found that when > I
> access the share folder, the windows will connect to the 80 port of the
> target host. this is just like the HTTP manner.
>
> If someone could help me, I'm very appreciate for you.
>
>
>
>


.