Re: A Newbie Question about networking

Tech-Archive recommends: Fix windows errors by optimizing your registry


"Space for rent" <vanname@xxxxxxxxx> wrote in message
news:1194452971.305580.174290@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
I have a wireless router (LinkSys WRT54GS) in use supporting only a
desktop (host) and a laptop. My desire is simply that I want to be
able to switch between the LAN and an exclusive hardwired connection
to the host. How would this be done?

Thanks for any input you offer!

I'm not sure that I totally understand the question, but my guess would be
to switch the wireless off on the router when you don't need the laptop.

I'm sure there's a better answer than that though.


.

Relevant Pages

  • Re: A Newbie Question about networking
    ... able to switch between the LAN and an exclusive hardwired connection ... to the host. ... to switch the wireless off on the router when you don't need the laptop. ... What do you mean by a "hardwired standalone unit"? ...
    (microsoft.public.windowsxp.network_web)
  • Re: A Newbie Question about networking
    ... able to switch between the LAN and an exclusive hardwired connection ... to the host. ... to switch the wireless off on the router when you don't need the laptop. ...
    (microsoft.public.windowsxp.network_web)
  • Re: Using Subversion for binary distribution?
    ... Mercurial/Hg. ... mount the new disk on your laptop, ... A good idea is to also set up a per-managed host workspace at the ... laptop$ ssh kobe ...
    (freebsd-current)
  • Re: Duplicate Echo Replies with Channel Bonding
    ... In this mode both interfaces receive packets, ... >When both eth0 and eth1 are up and I ping from Host C to Host A I get ... >The destination network 192.168.120.0/24 exists on both Router A and ... Switch B does not have the MAC address in its MAC address table ...
    (RedHat)
  • Re: GPO controlled firewall incorrectly ON due to Standard instead of Domain Profile
    ... site, a single SBS2k DC, 3Com switch with independent cable runs from switch ... > on the DCs), one of which is at another location, but the connectivity is ... Where is the workgroup to implement the standard profile? ... > laptop and resume it, or turn off/turn on the machine when you connect to ...
    (microsoft.public.windows.group_policy)