Re: How do I create a Wired & Wireless Network
- From: Barb Bowman <barb@xxxxxxxxxx>
- Date: Wed, 17 Oct 2007 05:33:28 -0400
Is your modem also a router or not? that would make a difference. If
not:
modem connects to the Internet
Linksys router connects via WAN port to modem
Powr cycle the modem after you remove the switch and connect the
router TO the modem
wired computers connect to Linksys (you don't need a separate switch
unless you need to uplink to the Linksys for more computers than
there are ports on the Linksys)
wireless laptop - make sure to setup the wireless security on the
Linksys and then the laptop. Use WPA2 or WPA, not WP.
On Tue, 16 Oct 2007 20:34:00 -0700, milwloco
<milwloco@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
Hello,--
Looking for ideas on how to properly setup a wired & wirelss network....
Right now I'm running 2 pc's and 1 laptop hooked up via ethernet to a 5 port
switch, with a dsl modem also connected to the switch. The network works
great.
I would like to add wireless to the network for my laptop.
I have a dsl modem, a 5 port network switch, and a Linksys WRT54G Router.
What would be the correct way to hookup this network? Is there any special
settings that I would need to be aware of?
Thanks Roger
Barb Bowman
MS Windows-MVP
http://www.microsoft.com/windowsxp/expertzone/meetexperts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/
.
- Follow-Ups:
- Re: How do I create a Wired & Wireless Network
- From: milwloco
- Re: How do I create a Wired & Wireless Network
- Prev by Date: Forcing all traffic through the VPN only?
- Next by Date: Re: How do I create a Wired & Wireless Network
- Previous by thread: Forcing all traffic through the VPN only?
- Next by thread: Re: How do I create a Wired & Wireless Network
- Index(es):
Relevant Pages
|
Loading