Re: Always get network cable is unplugged message after rebooting computer
- From: "Gary Hasler" <garyhasler@xxxxxxxxx>
- Date: Wed, 29 Aug 2007 04:49:04 GMT
Hi Barb you seem to know what you're talking about, so can I restate the
problem which I outlined before this thread kind of wandered off into
solving someone else's problem... :-|
for me, NOTHING will cure the "unplugged" message except rebooting the
modem--disabling and re-enabling definitely doesn't work. In fact, for what
it's worth, if I disable it in the Network CP when it's working properly,
and then try re-enabling, it also does not work, and the modem has to be
rebooted (maybe this indicates something!!!).
As for the other suggestions--bad cable, modem, etc--remember my internet
connection works just wonderfully..sometimes for weeks and weeks... until I
reboot the computer. And when I reboot the modem, it ALWAYS works just fine
again right away. Could there be one little hardware/firmware problem with
the modem that it fails to, say, respond to some command the OS gives after
reboot? Or vice versa--the same thing failing in the network adapter?
{Win XP Home SP2
Dell Dimension 9150 PentiumD 3 Ghz
onboard Intel(R) PRO/1000 PL network adapter
ISP: Shaw Cable (Canada)
Terayon Terapro TCM200 cable modem: coaxial cable going in; ethernet cable
going out to computer network port; no switches on it, just the standard 4
indicator lights. I have no idea if there are any config options on it or
how I can access them. }
"Barb Bowman" <barb@xxxxxxxxxx> wrote in message
news:hhk8d35utpmgl37s03ki514s25fpk8sfa4@xxxxxxxxxx
I've seen posts on the nvidia forums regarding jumbo frame settings
and the unplugged message. It may be worth your while to post this
issue there.
On Tue, 28 Aug 2007 09:13:17 -0700, ijourneaux
<ian_journeaux@xxxxxxxxxxx> wrote:
There is nothing in the event log indicating a problem. I tried the--
newest NForce drivers, the Nforce drivers from the motherboard
manufacturers website. Nothing worked.
As I indicated earlier, if I reboot the computer, the network always
comes back as netwrok cable is unplugged. All I need to do is disable
the connection and re-enable it and the network connection start
working correctly. I even tried a different cable but no luck.
Barb Bowman
MS Windows-MVP
http://www.microsoft.com/windowsxp/expertzone/meetexperts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/
.
- Follow-Ups:
- References:
- Always get network cable is unplugged message after rebooting computer
- From: ijourneaux
- Re: Always get network cable is unplugged message after rebooting computer
- From: ijourneaux
- Re: Always get network cable is unplugged message after rebooting computer
- From: Barb Bowman
- Re: Always get network cable is unplugged message after rebooting computer
- From: ijourneaux
- Re: Always get network cable is unplugged message after rebooting computer
- From: Barb Bowman
- Always get network cable is unplugged message after rebooting computer
- Prev by Date: Re: Internet Explorer version ???
- Next by Date: Re: Computer keeps dropping off network....
- Previous by thread: Re: Always get network cable is unplugged message after rebooting computer
- Next by thread: Re: Always get network cable is unplugged message after rebooting computer
- Index(es):
Relevant Pages
|
