Re: Lost Internet Connectivity

Regarding your Error 2 on the Firewall Service, do you have the
registry key called ServiceDll, Type Reg_Expand_SZ, value of
%SystemRoot%\System32\ipnathlp.dll found in HKLM\System
\CurrentControlSet\Services\SharedAccess\Paramaters\

I had the missing and the firewall service didn't start, after adding,
it worked.

On Aug 17, 12:56 pm, "Chuck [MVP]" <n...@xxxxxxxxxxx> wrote:
On Fri, 17 Aug 2007 10:18:01 -0700, Bob57 <Bo...@xxxxxxxxxxxxxxxxxxxxxxxxx>
wrote:





"nass" wrote:
"Tom Shubert <t...@xxxxxxxxxxxxxx>" wrote:
"Bob57" wrote:

Environment: Windows XP (Home), SP2, HP a320n, 2.08 GHz AMD. Windows
Firewall (off), McAfee Personal Firewall, VS, two-PC network, Motorola modem,
LinkSys router, Comcast Cable. PCI 10/100 Ethernet Connection.

Incident: McAfee detected malware, option: remove, result: Firewall
disabled, Internet connectivity lost. Error: Network Cable Unplugged.

1. Initial Fix: Reboot, re-establish network, trouble shoot modem,
connection, etc. Swapped cables, end-to-end, replace cable. Result: No
Change. Connection to second PC Maintained. Direct connect to modem, retry.
Result: No Change

2. Un-installed McAfee with McAfee utility. Reboot, etc. Result: No Change

3. Hardware Fix: Disabled PCI 10/100, installed D-Link 10/100 Fast Ethernet
Card. Installation recognized, Connection listed, re-installed network.
Result: No Change. Un-installed NIC (PCI 10/100), reinstalled. Result: No
Change

4. Trouble-shooting finds: Windows Firewall/ICSService not running, cannot
start. ipconfig tool not available due "Internalerror, request not
supported - Unable to query Host Name." DHCP Client - not running, cannot
start,error1068. Attempted manual start of Windows Firewall/ICSService
returnsError2- System cannot find file specified. PING returns null result

5. Run services.msc cannot manually start Firewall. Attempted fix with
NETSH FIREWALL RESET after loading rundll32 setupapi,InstallHinfSection
Ndi-Steelhead 132 %windir%\inf\netrass.inf NETSH FIREWALL RESET returns "OK"
but Firewall/ICSstart continues to return "error2: Windows cannot find the
file specified."

6. Device Manager indicates that the PCI 10/100 is working properly and that
there are no conflicts.

7. WMI is started (automatic) Cmd /k sc qc sharedaccess returns:

SERVICE_NAME: sharedaccess
TYPE : 20 WIN32_SHARE_PROCESS
START_TYPE :2AUTO_START
ERROR_CONTROL : 1 NORMAL
BINARY_PATH_NAME : C:\WINDOWS\System32\svchost.exe -k netsvcs
LOAD_ORDER_GROUP :
TAG : 0
DISPLAY_NAME : Windows Firewall/Internet Connection Sharing
(ICS)
DEPENDENCIES : Netman
: WinMgmt
SERVICE_START_NAME : LocalSystem

It would appear that the crux of the problem is No. 4 above in that some
file that is required for the service to run is missing from C:\Documents and
Settings\Owner> What file? Where to obtain? Comments/Suggestions
appreciated. Thanks.

Bob57

There are a number of TOOLS you can download which will repair a corrupted
TCP stack and Winsock. Try one of these. I like XPWINSOCKFIX.EXE which can
be downloaded at Snapfiles: http://www.snapfiles.com/get/winsockxpfix.html

This will often fix these kinds of problems.

Hi Tom,
I think you have bad Hardware, either the Modem which is my guess given up
the ghost and you can confirm that by taking a machine to another connection
and test to see the machine NIC is okay.
If it did connect after adjusting the settings ( you may or may not need to
adjust the settings) that mean the Modem or one of your hardware
(Modem/Router/Line cable is bad).
Sometimes the ISP test confirm the Line good or bad according to when it end
into the first Phone Plug on the wall and the reset is your priority to
confirm is good or bad.
How long this was going On, if it for a couple of days try system restore to
a week before this happened.
HTH.
nass

The modem is obviously working correctly - or I wouldn't be able to connect
to the 'Net and participate in this forum. All throughout this week-long
nightmare, the second network PC has continued to function with its Internet
connection. As stated previously, cables have been both swapped and
replaced, so I believe the issue is not hardware related, especially as I
replaced the PCI 10/100 with a fast ethernet card.

I ran the winsock repair utility (this is the third such utility) without
any change. The persistent problem has been the inability to start the Win
Firewall/ICSservice and the inability of Windows to recognize the PCI
ethernet connection, along with the ipconfig, ping, etc returning null
results.

Bob,

If your problem is related to LSP / Winsock corruption, as previously stated,
there are multiple repair tools, none of which is more effective than any other.
Depending upon what your problem is, you are advised to run each one, one at a
time. If any one makes a change, you should run each one again. And reset
TCP/IP too (IP and Winsock are not the same component).
<http://nitecruzr.blogspot.com/2005/05/problems-with-lsp-winsock-layer...>http://nitecruzr.blogspot.com/2005/05/problems-with-lsp-winsock-layer...

If the problem originates from the Windows Firewall service, which does fail
open (ie if its stopped, no traffic is passed), you may have to check Event
Viewer for clues. And ensure that Remote Procedure Call service is running.
<http://nitecruzr.blogspot.com/2005/05/using-event-viewer-to-get-detai...>http://nitecruzr.blogspot.com/2005/05/using-event-viewer-to-get-detai...
<http://nitecruzr.blogspot.com/2006/12/controlling-and-watching-servic...>http://nitecruzr.blogspot.com/2006/12/controlling-and-watching-servic...

--
Cheers,
Chuck, MS-MVP 2005-2007 [Windows - Networking]http://nitecruzr.blogspot.com/
Paranoia is not a problem, when it's a normal response from experience.
My email is AT DOT
actual address pchuck mvps org.- Hide quoted text -

- Show quoted text -


.

Relevant Pages

  • RE: Lost Internet Connectivity
    ... The modem is obviously working correctly - or I wouldn't be able to connect ... ethernet connection, along with the ipconfig, ping, etc returning null ... Firewall, McAfee Personal Firewall, VS, two-PC network, Motorola modem, ... connection, etc. Swapped cables, end-to-end, replace cable. ...
    (microsoft.public.windowsxp.network_web)
  • Re: Lost Internet Connectivity
    ... Firewall, McAfee Personal Firewall, VS, two-PC network, Motorola modem, ... PCI 10/100 Ethernet Connection. ... connection, etc. Swapped cables, end-to-end, replace cable. ...
    (microsoft.public.windowsxp.network_web)
  • RE: Lost Internet Connectivity
    ... Firewall, McAfee Personal Firewall, VS, two-PC network, Motorola modem, ... PCI 10/100 Ethernet Connection. ... Error: Network Cable Unplugged. ... connection, etc. Swapped cables, end-to-end, replace cable. ...
    (microsoft.public.windowsxp.network_web)
  • RE: Lost Internet Connectivity
    ... I think you have bad Hardware, either the Modem which is my guess given up ... Firewall, McAfee Personal Firewall, VS, two-PC network, Motorola modem, ... PCI 10/100 Ethernet Connection. ... connection, etc. Swapped cables, end-to-end, replace cable. ...
    (microsoft.public.windowsxp.network_web)
  • Re: HELP... HELP... HELP... my sonicwall DMZ firewall down
    ... > cables are connected and linkup. ... I am no expert on the sonicwall product, but I originally setup one for a ... This will basically locate your Firewall and bring up the ... broadband connection - ADSL or Cable ...
    (comp.security.firewalls)