Re: VPN Server

thank you for the reply.

yes...all necessary ports open etc..all passthrus enabled... pretty much
crossed my t's and dotted my i's on this. been round and round with Linksys
about it...and FINALLY got it working with XP Pro (server/host) and XP Home
(client) setup ONLY. Replicated all the exact same necessary settings for a
XP Home and XP Home setup.... only difference, it won't work for the life of
me... i get all the typical errors, can't remember all of them any more...
something like: connection can't be established, so ports closed etc....
basically all the SAME errors I was getting trying to set up the XP Pro and
XP Home setup until I finally set the IP to the server STATIC...then all
worked...did same for this new setup....identical settings as the working
test setup...so.... ALL I CAN FIGURE.... is XP Home CANNOT funtion as a
SERVER/HOST??????? : \

this faq says XP Home cannot be a server/host?
http://www.microsoft.com/technet/network/vpn/vpnfaq.mspx

under question:
Q. For which operating systems and with which protocols does Microsoft
provide remote access VPN servers?

A. Microsoft supports a fully-featured PPTP-based remote access server in
Windows NT Server 4.0, Windows 2000 Server, and Windows Server 2003.
Microsoft supports a fully-featured L2TP/IPSec-based remote access server in
Windows 2000 Server and Windows Server 2003.

Microsoft also supports a single-connection PPTP and L2TP/IPsec-based remote
access server in Windows 2000 Professional, Windows 2000 Server (standalone),
Windows XP Professional, and Windows Vista (all versions) through the
Incoming Connections feature of the Network Connections folder. For
information about Incoming Connections for Windows XP, see Incoming
connections. For information about Incoming Connections for Windows Vista,
see Set up an incoming VPN or dial-up connection.

Microsoft supports a Secure Socket Tunneling Protocol (SSTP) remote access
server in Windows Server 2008. For more information about SSTP, see The
Secure Socket Tunneling Protocoland the Routing and Remote Access Blog.


so confused... maybe somebody can verify if XP Home can act as a aserver or
not?

thx!!!!!

Tim





"Sooner Al [MVP]" wrote:

"Tim" <Tim@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:333FBD48-DD88-4891-97E3-136756F5A411@xxxxxxxxxxxxxxxx
hmm.... are you ABSOLUTLEY sure XP home edition can be setup as a
server/host for VPN? (using XP Home, not third party software etc...but
the
built in vPN features in XP home and pro) i have tried everything possible
to
get (2) computers that both have Home editon to connect and no luck at
all.
I can get a XP PRO pc and a XP home to do it though....XP PRo is the HOST,
XP
HOME iois the client. I found a microsoft support page saying SERVER
isn't
supported in Home edition but on PRO?

the (2) machines also have their own routers each end...all ports
necessary
open and firewalls off (for making sure fiirewalls aren't interferring at
all.).

this is really driiving me crazy... some people say XP home can HOST and
some say no? I know it can be a client...but can it host?
thanks!!!!



What error message(s) do you get when you try to connect to the XP Home VPN
server PC?

Note that if the VPN server PC is behind a firewall or router you need to
open TCP Port 1723 and the firewall/router must be able to pass GRE Protocol
47 traffic. Some routers call the latter "PPTP Pass Through" or "VPN Pass
Through". Check the documentation for help with that. GRE Protocol 47
traffic can be problematic with some consumer grade routers.

You can run the test detailed on this page to test VPN connectivity. See the
"PPTP Ping" and "VPN Traffic" sections...

http://www.microsoft.com/technet/community/columns/cableguy/cg0105.mspx

--

Al Jarvi (MS-MVP Windows Networking)

Please post *ALL* questions and replies to the news group for the
mutual benefit of all of us...
The MS-MVP Program - http://mvp.support.microsoft.com
This posting is provided "AS IS" with no warranties, and confers no
rights...

.

Relevant Pages

  • Re: IIS User Limit for XP Pro ?
    ... XP Pro allows 10 concurrent connections to the computer. ... take 2 connections every time they connect to your server. ... I had thought that the MS Client operating systems usually ...
    (microsoft.public.windowsxp.general)
  • RE: pf buggy on 6.1-STABLE?
    ... when application used for load-testing web server running on MS Windows ... reuses source TCP port numbers for these outbound connections. ...
    (freebsd-stable)
  • Re: Problems with DC and TS
    ... The problem is fixed.I checked the limit of connections and it was checked ... Before you try to repair the installation, ... MCSE, CCEA, Microsoft MVP - Terminal Server ... We have a windows 2003 domain whith several windows 2003 ...
    (microsoft.public.windows.terminal_services)
  • Re: PEER TO PEER NETWORKING
    ... >I AM HAVING A PROBLEM WITH MY SERVER RUNNING ON WINDOWS XP PRO. ... > THIS TIME BECAUSE THERE ARE ALREADY AS MANY CONNECTIONS AS THE COMPUTER ... 10 is the maximum number of inbound connections XP Pro will accept. ... You need to use a different OS on the server. ...
    (microsoft.public.windowsxp.network_web)
  • Office 2000 to Office 2003 upgrade value
    ... Office 2000 Pro. ... running Exchange 2003 on a Windows Server 2003 platform in a Windows ... A question has been presented regarding an upgrade of the Office suite ...
    (microsoft.public.office.setup)
Loading