Re: Unable to delete connection



In article <410BD285-21F9-458B-B372-616EEF118EE3@xxxxxxxxxxxxx>, GM
<GM@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
I have had trouble with a D-Link wireless router which I have physically
removed form my network. I now connect to the internet directly through a
Broadmax ADSL modem. However, I am unable to remove the local area
connection made earlier for the router as the "delete" command is
greyed-out. In addition this connection is shown as having only part
functionality and it must be enabled for me to access the internet.
Furthermore I cannot access the browser-accessed configuration function of my
modem (I have the correct IP address) and I suspect this is the cause of the
problem.

How can I make a fresh start in this by deleting the old local area
connection?

Thanks in advance!

GM

The local area connection wasn't made for the router. It's there
because the computer has a built-in network (Ethernet) adapter.
Windows XP automatically creates a connection for each installed
network adapter.

The only way to delete the local area connection is to go to Device
Manager and un-install the network adapter that the connection uses.
When you restart the computer, it will re-install the network adapter
and re-create the local area connection.

In the Network Connections folder, is there a Broadband connection for
your ADSL modem? If so, it's normal for the local area connection to
say that it has limited connectivity. That's because your Internet
access is through the broadband connection, not through the local area
connection. You can eliminate the "limited connectivity" message:

1. Right-click the local area connection.
2. Click Properties.
3. Un-check the box that says "Notify me when this connection has
limited or no connectivity".
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional Program
http://mvp.support.microsoft.com
.



Relevant Pages

  • Re: Network went down
    ... I checked my Local area setting. ... doesn't have its Local Area connection in either area? ... passwords before so don't know anything about this step. ... >Under Network connections on each machine, ...
    (microsoft.public.windowsxp.network_web)
  • Re: One workstation cant access email from ISP - CROSSPOST
    ... Ethernet adapter Local Area Connection: ... Ethernet adapter Wireless Network Connection: ... Switch is nothing more than a patch panel; switched him to a new port - ...
    (microsoft.public.exchange.admin)
  • Network problems still
    ... I checked my Local area setting. ... doesn't have its Local Area connection in either area? ... passwords before so don't know anything about this step. ... >Under Network connections on each machine, ...
    (microsoft.public.windowsxp.network_web)
  • Re: communication ports
    ... The Local area network is LAC 2 ... The IP address on the support page of the LAC 2 does start ... >check and see if your original Local Area Connection is ...
    (microsoft.public.windowsxp.general)
  • Re: 2 Laptops, only 1 can be on WAP at a time
    ... There is a common NAT behind both the Cisco Router, ... All PCs are located in the Local Area Network Section, ... The initial connection can then be manually ...
    (alt.sys.pc-clone.dell)