Re: Unable to ftp

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance



Replying to Richard since the original poster is posting from a spam haven
usenet provider that is dropped by my news server.

Richard G. Harper wrote:

If this is a work computer, check with your network administrators. If
this is a home computer, check with your ISP.

Actually, that's not quite accurate. The original poster might try putting
their FTP client in "passive mode." The default active mode does not work
through most NATs (Linux-box based NAT router setups with connection
tracking enabled being the notable exception). In the typical active mode
connection, the client connects to the FTP server, then the FTP server
connects back to the client. If you don't accept outside connections,
active mode will also fail.

Passive mode uses the single, client-initiated connection for all
communication. You lose the ability to cancel a file transfer without
dropping the connection in favor of being able to connect through NAT
routers that don't track connections and firewalls.

.



Relevant Pages

  • Re: .Net Scalability problem
    ... LoadRunner will peak out a server with a few virtual users. ... To get an idea of load, ... Fire off the test client and watch the number of ... > So I think that the MTC generate concurrent connection and per ...
    (microsoft.public.dotnet.framework.adonet)
  • Re: Connection lost at same time every hour (sometimes)
    ... After making the two following alterations on the server the problem seems ... After analyze your ipconfig on SBS and client, ... Then, other connection is good, ...
    (microsoft.public.windows.server.sbs)
  • Re: server disconnection - very often
    ... Reason of permanent popups is VMware server aplication on clients. ... Run CEICW to configure the network of SBS: ... Two network adapters - manual router connection to broadband ... Uninstall VMware on client. ...
    (microsoft.public.windows.server.sbs)
  • Re: Lan setup 2 nic
    ... The external nic only has TCP/IP enabled. ... Ipconfig of the server is looking good, but the client is still missing the ... > connection so we have a 2 nic with router setup now. ...
    (microsoft.public.windows.server.sbs)
  • Re: Regular disconnections from remote web workplace
    ... I can connect to office server and all office clients from home at all times ... be physically working right up until the connection is lost. ... If I enter http://companyip from a client I receive the login screen for the ... Click Services tab and select Hide All Microsoft Services and Disable ...
    (microsoft.public.windows.server.sbs)