Re: Unable to connect to my wireless laptop

Here is ipconfig info from each computer. The first listing is from the main
computer, the last listing is from my laptop.
:

Windows IP Configuration

Host Name . . . . . . . . . . . . : athlon3000

Primary Dns Suffix . . . . . . . :

Node Type . . . . . . . . . . . . : Unknown

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : No

DNS Suffix Search List. . . . . . : Belkin

Ethernet adapter Local Area Connection 4:

Connection-specific DNS Suffix . : Belkin

Description . . . . . . . . . . . : Linksys LNE100TX Fast Ethernet
Adapter(LNE100TX v4)

Physical Address. . . . . . . . . : 00-0C-41-26-24-4C

Dhcp Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

IP Address. . . . . . . . . . . . : 192.168.2.2

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : 192.168.2.1

DHCP Server . . . . . . . . . . . : 192.168.2.1

DNS Servers . . . . . . . . . . . : 192.168.2.1

68.87.75.194

68.87.64.146

Lease Obtained. . . . . . . . . . : Thursday, November 09, 2006
1:37:51 PM

Lease Expires . . . . . . . . . . : Monday, January 18, 2038
10:14:07 PM



Windows IP Configuration

Host Name . . . . . . . . . . . . : Dell2000

Primary Dns Suffix . . . . . . . :

Node Type . . . . . . . . . . . . : Unknown

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : Yes

DNS Suffix Search List. . . . . . : hsd1.pa.comcast.net.


Ethernet adapter Local Area Connection:


Connection-specific DNS Suffix . : hsd1.pa.comcast.net.

Description . . . . . . . . . . . : Intel(R) PRO/100 VE Network
Connection

Physical Address. . . . . . . . . : 00-07-E9-CB-08-1B

Dhcp Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

IP Address. . . . . . . . . . . . : 192.168.1.104

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : 192.168.1.1

DHCP Server . . . . . . . . . . . : 192.168.1.1

DNS Servers . . . . . . . . . . . : 68.87.75.194

68.87.64.146

Lease Obtained. . . . . . . . . . : Thursday, November 09, 2006
2:21:55 PM

Lease Expires . . . . . . . . . . : Friday, November 10, 2006
2:21:55 PM


Windows IP Configuration

Host Name . . . . . . . . . . . . : Jim

Primary Dns Suffix . . . . . . . :

Node Type . . . . . . . . . . . . : Hybrid

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : No

DNS Suffix Search List. . . . . . : Belkin


Ethernet adapter Wireless Network Connection 2:


Connection-specific DNS Suffix . : Belkin

Description . . . . . . . . . . . : Broadcom 802.11b/g WLAN

Physical Address. . . . . . . . . : 00-14-A5-C4-72-F0

Dhcp Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

IP Address. . . . . . . . . . . . : 192.168.2.3

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : 192.168.2.1

DHCP Server . . . . . . . . . . . : 192.168.2.1

DNS Servers . . . . . . . . . . . : 192.168.2.1

68.87.75.194

68.87.64.146

Lease Obtained. . . . . . . . . . : Thursday, November 09, 2006
9:57:43 PM

Lease Expires . . . . . . . . . . : Monday, January 18, 2038
10:14:07 PM




"Chuck" <none@xxxxxxxxxxx> wrote in message
news:0227l2dgmgsins1bdmfsl3t2cc4rgidq1e@xxxxxxxxxx
On Thu, 9 Nov 2006 14:02:37 -0500, "Jim" <jrwolfe@xxxxxxxxxxx> wrote:

"Chuck" <none@xxxxxxxxxxx> wrote in message
news:0vf6l2lvpgb5v9pq78rcuj3k09qi7iefjt@xxxxxxxxxx
On Thu, 9 Nov 2006 08:00:22 -0500, "Jim" <jrwolfe@xxxxxxxxxxx> wrote:

I running several XP Pro computers on a wired LAN. Just purchased a
laptop
which I initially added to LAN.

I decided I didn't want a hardwired connection to my laptop so I added a
wireless router to my system. My laptop can access the internet through
the
wireless router but it can't access any of my other LAN computers.

Need help please.

Jim,

You need to use the WiFi router as a WiFi AP, not a router, and keep the
same
subnet for the laptop.
<http://nitecruzr.blogspot.com/2005/06/file-sharing-on-lan-with-two-routers.html>
http://nitecruzr.blogspot.com/2005/06/file-sharing-on-lan-with-two-routers.html

Many thanks for the info but I need more help. I have a little experience
in
networking but I'm far from an expert.

This is my setup. I go from my main computer to my new wireless router.
Out
of the wireless router I go back to my original router - is that the
correct
setup??

I've tried the procedure below (as best as I understand it) with no
success.

My currect situation is this:
Can access the internet on both the 2 wired desktop systems as well as my
wireless laptop
Can no longer access any of my networked computers
IP addresses on both desktop systems are out of range (192.168.2.2 and
192.168.1.103)
but IP addresses on main desktop and laptop are in range.

Note: Once I turn off DHCP on the wireless router (step 3 below) and
reboot
routers I have problems.

TIA
------------------------------------------------------------------------------------------------------
1. Using a PC wired into the current router, unplug it from the wired
connection and plug into a LAN port on the secondary router. Access the
secondary router using your browser via its default LAN IP address and
default password. Since the PC was attached to the previous router you
will
have tell the PC to obtain a LAN IP from the new device. Use 'winipcfg' in
win9x or 'ipconfig release/renew' with W2K/XP on the PC.

2. On the secondary router (hereafter called the AP)

a. change the default password to a minimum combination of 8
letters/numbers/symbols.

b. Change the ESSID to a unique name and make all the necessary wireless
configurations.

3. Then, in the AP, go to the LAN setup page:

a. Turn DHCP serving OFF.

b. Change the LAN IP of the AP from its default so that it lies within the
subnet of the primary router but preferably outside the dynamic LAN IP
range
of the primary router. (examples below)

c. Disable or turn RIP off, if there is that option.

d. Disable or turn off Universal Plug and Play (UPnP) support (if any).

4. Plug the PC back into the wired connection and repeat the process of
getting new LAN IP. A reboot of the PC may be needed.

5. Plug the AP into the router, LAN port TO LAN port directly or via
switch/patch panel etc.

6. It may be necessary to reboot one or both routers but one should be
able
to assign LANIPs wirelessly and connect at this point, ensuring wifi card
setup properly.

OK, let's diagnose your problem. Look at "browstat status" and "ipconfig
/all",
from each computer. Read this article, and linked articles, and follow
instructions precisely (download browstat!):
<http://nitecruzr.blogspot.com/2005/05/troubleshooting-network-neighborhood.html#AskingForHelp>
http://nitecruzr.blogspot.com/2005/05/troubleshooting-network-neighborhood.html#AskingForHelp

The key here is router LAN to AP LAN. And no DHCP on the AP.

Be generous. Provide diagnostic data for each computer, and don't edit
the
content. The diagnosis may be in the details.

--
Cheers,
Chuck, MS-MVP [Windows - Networking]
http://nitecruzr.blogspot.com/
Paranoia is not a problem, when it's a normal response from experience.
My email is AT DOT
actual address pchuck mvps org.


.

Relevant Pages

  • Re: wireless home networks - where to begin?
    ... The wife has a laptop she uses for work, ... about me getting a wireless router, and then the laptop can be used ... it work if it's in the basement? ... I have my wireless router in my basement and it works fine all over the ...
    (rec.sport.football.college)
  • Re: Unable to connect to my wireless laptop
    ... It was a problem with Norton Internet Security setting on the laptop. ... Jim is the laptop and the WiFi router is 192.168.2.1. ... Change its LAN address to 192.168.1.250. ...
    (microsoft.public.windowsxp.network_web)
  • Re: Remote Desktop problem
    ... I have an older Linksys router BEFW11S4 ver. ... all traffic between machines within the LAN. ... My host computer is my home desktop and my client computer is my laptop. ...
    (microsoft.public.windowsxp.work_remotely)
  • Re: setup an isolated wireless network
    ... on the lan port of AP put an static IP, on the switch where do you connect ... router, so the users who connect to AP will "see" only the AP and the router ... and the router.That will isolate the internal network and all access from ... I have no choice to plug wireless router to my network, ...
    (microsoft.public.windows.server.networking)
  • Re: How do I create/configure a secure wireless network for my office AND allow customers to connect
    ... I have one laptop that is wireless, ... What can/should I do in order to maintain a secure LAN network for my ... That means plugging the office router into one of the public ...
    (comp.sys.mac.comm)