Re: Unable to connect to my wireless laptop

Many thanks for the info but I need more help. I have a little experience in
networking but I'm far from an expert.

This is my setup. I go from my main computer to my new wireless router. Out
of the wireless router I go back to my original router - is that the correct
setup??

I've tried the procedure below (as best as I understand it) with no success.

My currect situation is this:
Can access the internet on both the 2 wired desktop systems as well as my
wireless laptop
Can no longer access any of my networked computers
IP addresses on both desktop systems are out of range (192.168.2.2 and
192.168.1.103)
but IP addresses on main desktop and laptop are in range.

Note: Once I turn off DHCP on the wireless router (step 3 below) and reboot
routers I have problems.

TIA
------------------------------------------------------------------------------------------------------
1. Using a PC wired into the current router, unplug it from the wired
connection and plug into a LAN port on the secondary router. Access the
secondary router using your browser via its default LAN IP address and
default password. Since the PC was attached to the previous router you will
have tell the PC to obtain a LAN IP from the new device. Use 'winipcfg' in
win9x or 'ipconfig release/renew' with W2K/XP on the PC.

2. On the secondary router (hereafter called the AP)

a. change the default password to a minimum combination of 8
letters/numbers/symbols.

b. Change the ESSID to a unique name and make all the necessary wireless
configurations.

3. Then, in the AP, go to the LAN setup page:

a. Turn DHCP serving OFF.

b. Change the LAN IP of the AP from its default so that it lies within the
subnet of the primary router but preferably outside the dynamic LAN IP range
of the primary router. (examples below)

c. Disable or turn RIP off, if there is that option.

d. Disable or turn off Universal Plug and Play (UPnP) support (if any).

4. Plug the PC back into the wired connection and repeat the process of
getting new LAN IP. A reboot of the PC may be needed.

5. Plug the AP into the router, LAN port TO LAN port directly or via
switch/patch panel etc.

6. It may be necessary to reboot one or both routers but one should be able
to assign LANIPs wirelessly and connect at this point, ensuring wifi card
setup properly.




"Chuck" <none@xxxxxxxxxxx> wrote in message
news:0vf6l2lvpgb5v9pq78rcuj3k09qi7iefjt@xxxxxxxxxx
On Thu, 9 Nov 2006 08:00:22 -0500, "Jim" <jrwolfe@xxxxxxxxxxx> wrote:

I running several XP Pro computers on a wired LAN. Just purchased a laptop
which I initially added to LAN.

I decided I didn't want a hardwired connection to my laptop so I added a
wireless router to my system. My laptop can access the internet through
the
wireless router but it can't access any of my other LAN computers.

Need help please.

Jim,

You need to use the WiFi router as a WiFi AP, not a router, and keep the
same
subnet for the laptop.
<http://nitecruzr.blogspot.com/2005/06/file-sharing-on-lan-with-two-routers.html>
http://nitecruzr.blogspot.com/2005/06/file-sharing-on-lan-with-two-routers.html

--
Cheers,
Chuck, MS-MVP [Windows - Networking]
http://nitecruzr.blogspot.com/
Paranoia is not a problem, when it's a normal response from experience.
My email is AT DOT
actual address pchuck mvps org.


.

Relevant Pages

  • Re: Problem setting up workgroup between laptop and main computer
    ... It's sorted now - it was just an issue with the setup of DD WRT. ... was set up as a client with its own subnet and DHCP server, ... Once I got the primary router to assign an IP address to the ... Buffalo Wireless Router can not be plugged into a Tel. line, ...
    (microsoft.public.windowsxp.network_web)
  • Re: Definition of terms
    ... Wireless Networking basics: ... system setup facilities to us such that we could understand them, ... the router. ... The LAN IP address is on the LAN side of the ...
    (alt.internet.wireless)
  • Re: Sharing files between XP house and W98 workshop?
    ... Please provide your router make/model or a link to the configuration setup document from the manufacturer. ... If I open my Prestige LAN Configurator then I get this in my browser: ...
    (microsoft.public.windowsxp.customize)
  • Re: Unable to connect to my wireless laptop
    ... the last listing is from my laptop. ... wireless router but it can't access any of my other LAN computers. ...
    (microsoft.public.windowsxp.network_web)
  • Re: setup an isolated wireless network
    ... on the lan port of AP put an static IP, on the switch where do you connect ... router, so the users who connect to AP will "see" only the AP and the router ... and the router.That will isolate the internal network and all access from ... I have no choice to plug wireless router to my network, ...
    (microsoft.public.windows.server.networking)